Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
Analogue settable multifunction time relay, 1 NO contact 16A
Ir noliktavā: Nē
Piegādātāja krājumi: Nē
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
39,24 €
EAN: 4010312602935
MPN: 23100001
Iepakojums: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | Analogue settable multifunction time relay, 1 NO contact 16A |
| Zīmols | ELTAKO |
| Kategorijas |
Releji |
| Izcelsmes valsts | CN |
| Harmonizētās sistēmas kods | 8536 4900 00 |
| Montāžas metode | DIN sliede |
| Funkcija | Daudzfunkcionāls |
| Iebūvētais augstums | 58 mm |
| Uzbudinājuma veids | Analogs ar vairākām funkcijām |
| Platums moduļu atstarpju skaitā | 1 |
| Pārslēgšanas slēdžu skaits | 0 |
| Vadības spriegums 1 | 230 V |
| Vadības spriegums 2 | 8-230 V |
| Vadības sprieguma veids 1 | AC |
| Vadības sprieguma veids 2 | AC/DC |
| Frekvences vadības spriegums 1 | 50 Hz |
| Frekvences vadības spriegums 2 | 50 Hz |
| Barošanas sprieguma sprieguma veids | AC |
| Barošanas spriegums | 250 V |
| 1. intervāla vienība | Minūtes/ stundas |
| 1. intervāls | 0.1-40 |
| Nominālā pārslēgšanas strāva pie 250 V maiņstrāvas | 16 A |
| Slēdža jaudas kvēlspuldzes | 2300 W |
| Slēdža jaudas dienasgaismas spuldze DUO | 1000 VA |
| Slēdža jaudas dienasgaismas spuldze induktīva | 1000 VA |
| Slēdža jaudas dienasgaismas spuldze paralēli | 500 VA |
| Kontaktu skaits kā parasti slēgtam kontaktam | 0 |
| Kontaktu skaits kā parasti atvērtam kontaktam | 1 |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 4010312602935, 4010312602935 |
| Iepakojuma līmenis 2 | 4010312602935 |
| Iepakojuma līmenis 3 | 4010312602935 |
Lejupielādes
Apraksts
1 NO contact not potential free 16A/250V AC. 230V LED lamps up to 200W, incandescent lamps 2300W*. Standby loss 0.5 watt only. Modular device for DIN EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Zero passage switching to protect contacts and lamps. State-of-the-art hybrid technology combines advantages of nonwearing electronic control with high capacity of special relays. 230V control voltage and additionally 8 to 230V UC electrically isolated universal control voltage. 230V supply voltage and switching voltage. Very low switching noise. Time settings between 0.1 seconds and 40 hours. Functions F: RV = release delay. AV = operate delay. TI = clock generator starting with impulse. TP = clock generator starting with pause. IA = impulse-controlled operate delay. EW = fleeting NO contact. AW = fleeting NC contact. ARV = operate and release delay. ON = permanent ON. OFF = permanent OFF. The LED below the upper function rotary switch informs about the position of the contact during the countdown. It blinks while the contact is open and stays on as long as the contact is closed. The time base T is selected by means of the middle, latching rotary switch T. Time-base figures available are 0.1 second, 0.5 seconds, 2 seconds, 5 seconds, 1 minute, 2 minutes, 5 minutes, 1 hour, 2 hours and 4 hours. The total time is obtained by multiplying the time base by the multiplier. The multiplier xT is set on the upper, latching rotary switch xT and is in the range from 1 to 10. Thus, time settings can be selected in the range from 0.1 second (time base 0.1 second and multiplier 1) and 40 hours (time base 4 hours and multiplier 10). * The maximum load can be used starting at a delay time or clock cycle of 5 minutes. The maximum load will be reduced for shorter times as follows: up to 2 seconds 15%, up to 2 minutes 30%, up to 5 minutes 60%.
