Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
Motor Management, TeSys T, motor controller, Profibus DP, 6 logic inputs, 3 logic outputs, 1.35 to 27A, 100 to 240VAC |
Zīmols |
Schneider Electric
|
Kategorijas |
Vadības pārnesumkārba
|
Izcelsmes valsts |
CN |
Harmonizētās sistēmas kods |
8537 1091 99
|
Digitālo ieeju skaits |
0 |
Analogo ieeju skaits |
0 |
Analogo izeju skaits |
0 |
Nominālais vadības barošanas spriegums pie AC 50 Hz |
100-240 V |
Nominālais vadības barošanas spriegums pie AC 60 Hz |
100-240 V |
Aizsardzības pakāpe (IP) |
IP20 |
Nominālā darba strāva Ie |
1.35-27 A |
Elektronisko izeju skaits |
0 |
Izeju skaits, ar kontaktu |
5 |
Interfeisa veids |
PROFIBUS |
Papildu un vadības strāvas ķēdes elektriskā pieslēguma veids |
Skrūvju savienojums |
Nominālā darbības frekvence |
50-60 Hz |
Nominālais spriegums Ue pie maiņstrāvas 50 Hz |
93.5-264 V |
Nominālais spriegums Ue pie maiņstrāvas 60 Hz |
93.5-264 V |
Analogā temperatūras sensora ieeja |
Yes |
Ievade zemējuma defekta noteikšanai |
Yes |
Ievads termistora savienojumam |
Yes |
Sprieguma noteikšanas modulis |
No |
Strāvas noteikšanas modulis |
Yes |
Savienojuma sistēmas veids |
Skrūvju savienojums |
Sprieguma veids iedarbināšanai |
AC |
Iepakojuma informācija
Iepakojuma līmenis 1 |
3389119404839 |
Iepakojuma līmenis 2 |
3389119404836 |
Lejupielādes
Apraksts
TeSys T is a motor management system that provides full motor monitoring, control, and protection when used with short circuit protection and a contactor. TeSys T manages most critical processes while reducing downtime and increasing productivity. TeSys T is a flexible system that integrates seamlessly into your automation system through five major communication protocols. TeSys T predicts what will happen in the process, as it accurately monitors current, voltage, and power over a wide range. This controller is the central component in the motor management system. The module manages the basic functions of the motor management system. It manages the measurement of 3 phase current via integral current transformers from 0.4 to 100 A or up to 810 A by external current transformers. It also measures ground current with internal or external ground sensors, motor temperature and the inputs and outputs for the various motor control modes, detected fault management and other functions. Profibus DP protocol is used by this controller. This module has 6 discrete logic inputs, 3 relay logic outputs and a relay output for detected fault signaling overload relay. The current range of this controller is 1.35 to 27 amperes. 120 to 240 VAC is used to power this controller. Controller is 2.40 inches tall, 3.58 inches wide and 4.82 inches deep. Controller weighs 1.17 lbs. Controller has the following certifications: UL, CSA NOM, ATEX, BV, EAC, RINA, LROS, DNV, ABS, GL, KERI, RMRoS, C-Tick and CCC.