Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
PM5563 THD RS485 DL ETH 4CT REMOTE DISPL
Ir noliktavā: Nē
Piegādātāja krājumi: Nē
Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
660,24 €
EAN: 3606480761416
MPN: METSEPM5563RD
Iepakojums: 1
Technical Information
| Preces stāvoklis | Jauns |
| Ražotāja nosaukums | PM5563 THD RS485 DL ETH 4CT REMOTE DISPL |
| Zīmols | Schneider Electric |
| Kategorijas |
Elektrības skaitītāji |
| Izcelsmes valsts | IN |
| Harmonizētās sistēmas kods | 9030 3900 00 |
| Montāžas metode | Iebūvēts |
| Platums | 0 mm |
| Augstums | 0 mm |
| Dziļums | 0 mm |
| Biežums | 45-65 Hz |
| Maks. strāva (Imax) | 10 A |
| Platums moduļu atstarpju skaitā | 6 |
| Aizsardzības pakāpe (IP) | IP52 |
| Pulss | 1-10000000 Imp/kWh (kvarh) |
| Pole tips | Četru vadītāju |
| Nominālais spriegums (Un) NL | 20-400 V |
| Nominālā strāva (in) | 5 A |
Iepakojuma informācija
| Iepakojuma līmenis 1 | 3606480761416 |
Citi tehniskie dati
| Modelis | Mērīšanas transformators |
| Piemērots | Iegāde |
| Norādes veids | Digitālais |
| Kopējais pozīciju skaits (skaitītājs) | 0 |
| Skaitītāja veids | Elektroniskais |
| Interfeisa veids | RS-485 |
| Enerģijas veids | Efektīvā jauda un aklā jauda |
| Tarifa veids | Vairāku tarifu |
| Tarifu kontrole | Ārējais |
| Kalibrēts | No |
| Impulsu izvade | Optika |
| Impulsa veids | S0 |
| Mērījumu veida slodzes profils | Yes |
| EEC40 paraksts | No |
| Ar bloķēšanas kodu | No |
| Nominālais spriegums (Un) LL | 35-690 V |
| Aizsardzības pakāpe (NEMA) | 1 |
Apraksts
This device is a DIN-mount energy meter with an additional 96mm by 96mm backlit LCD remote display. The meter provides Class 0.2S accuracy per IEC 62053-22 standard and 128 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 63rd Harmonic. Include 1.1 MegaBytes of memory for up to 14 selectable parameters with configurable interval and duration. This meter also feature the direct monitoring of neutral current. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 480 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 20 to 690 VAC at 45 to 65 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 45 to 65 Hz. Communication protocol are Modbus RTU and ASCII 2 wires with RS485 port support plus Modbus TCP/IP, Ethernet/IP and BACnet/IP based on 10/100 Mbit/s, daisy chain Ethernet with RJ45 port support. The embedded communication capabilities allow the support of the DNP 3.0 protocol, the access to an onboard web server and a Serial to Ethernet gateway. The meter also has four digital inputs with WAGES support and two digital outputs. There are 52 configurable alarms and it supports eight tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 3.03 inches (77 millimetres), height 3.78 inches (96 millimetres) and product weight 15.9 onces (450 g).