Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!

Sākums
Instalācija
Sadales paneļi
REGplus IP20 C6Amodul 270°M

METZ CONNECT

REGplus IP20 C6Amodul 270°M

Name: REGplus IP20 C6Amodul 270°M
Brand: METZ CONNECT
Availability: PreOrder

Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1

Noliktavas cena (bez PVN):

Cena pēc pieprasījuma

Šī cena ir spēkā, kamēr prece ir krājumā

EAN: 4250184136552

MPN: 130B127003-E

Iepakojums: 1

Kaste: 10

Technical Information

Preces stāvoklis	Jauns
Ražotāja nosaukums	REGplus IP20 C6Amodul 270°M
Zīmols	METZ CONNECT
Kategorijas	Sadales paneļi
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8536 6990 00
Materiāls	Metāls
Stiprinājuma veids	DIN sliede (augšējā cepures sliede) 35 mm
DIN sliedes adaptera veids	Taisni

Iepakojuma informācija

Iepakojuma līmenis 1	4250184136552
Iepakojuma līmenis 2	4250184136552

Apraksts

Termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations, equipped with C6, Amodul 270° RJ45 individual modulecable feed 45° from the bottom, plug direction 45° downwards, certified to GHMT Cat.6, A re-embedded PVPCat.6, A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certifiedcompliance with class E, A up to 500 MHz according to ISO/IEC 11801, DIN EN 50173-1tested: component up to 600 MHz, link up to 800 MHz, suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy to install connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC), conductor assignment to T568A and T568B is directly printed on the stuffer cap, width of 1HP allows mounting up to 12 REG plus in standard electrical distribution panels, When mounted as a device of protection class I, the equipotential bonding is realized directly over the top hat rail by means of an integrated equipotential plate. This has to be connected to the equipotential bonding of the building by means of a bonding terminal. A cover protects the module against direct contact. If mounted in distributor panels with protective insulation, protection class II is guaranteed. In this case, it is necessary to remove the equipotential bonding spring.integrated dust protection cover (also colored)