RF PB sens. 3-g KNX

Preces stāvoklis	Jauns
Zīmols	Gira
Kategorijas	Sensori
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8536 5011 00
Montāžas metode	Iebūvējams vienā līmenī (apmetums)
Krāsa	Citi
Virsmas aizsardzība	Citi
Ar displeju	No
Ar IR sensoru	No
Ar istabas temperatūras regulatoru	No
Materiāla kvalitāte	Citi
Autobusu sistēma KNX	Yes
Autobusu sistēmas radio bieži	No
Autobusu sistēma Powernet	No
Ar autobusa savienojumu	No
Materiāls	Citi
Pogu skaits	3
Citas autobusu sistēmas	Nav
Autobusu sistēma LON	No
Ar pretaizdzīšanas/demontāžas aizsardzību	No
RAL numurs (līdzīgs)	0
Ar etiķetes laukumu	No
Aizsardzības pakāpe (IP)	IP20
Ar LED indikāciju	Yes
Caurspīdīgs	No
Iedarbināšanas punktu skaits	6
Autobusu sistēma KNX radio	Yes
Radio bieži divvirzienu	-
Min. iebūvētās instalācijas kastes dziļums	0 mm

Iepakojuma līmenis 1	4010337017257
Iepakojuma līmenis 2	4010337017257

RF pushbutton sensor, 3-gang for KNX System 55 Start-up rocker The RF pushbutton sensors for KNX transmit KNX telegrams wirelessly when the button is pressed, depending on the parameter settings when the application program is loaded. These could be e.g. telegrams for switching pressing, for dimming or blind control. It is also possible to program encoder functions (dimming encoders and scene auxiliary units). Features: Confirmation function as well as transmit and status display via two-colour LED (red green) separately for each button by 2-stage display function. Optional status display by separate 1-bit status communication objects. Transmit and confirmation display deactivatable. The pushbutton sensor can be attached to walls using screws or affixed to smooth or transparent surfaces using a mounting plate. Project planning, start-up and parameter setting are performed using ETS (version 5 or later). Battery-operated device. "Switching" function: Rocker or button function. Command for pressing and releasing can be parameterised (ON, OFF, CHANGE, no reaction). "Dimming" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (lighter - ON, darker - OFF). "Blind" function: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (ON, OFF, CHANGE). Time between short and long-term command can be set in the parameters. "Value transmitter" and "Scene auxiliary unit" functions: Rocker function. Command when the rocker is pressed (right and left button) can be set in the parameters (values 0 to 255, 0 to 100% or scene number). With scene auxiliary unit: Memory function possible. Notes : Batteries are consumables and must be replaced regularly. Please observe the regulations on the disposal of used batteries. The pushbutton sensor is supplied with a program-neutral start-up rocker. The suitable rocker set for the design line must be ordered separately. The range can be reduced when using rocker sets and or cover frames.