SINAMICS CU250S-2 PN

Preces stāvoklis	Jauns
Ražotāja nosaukums	SINAMICS G120 CONTROL UNIT CU250S-2...
Zīmols	Siemens
Kategorijas	Vadības pārnesumkārba
Izcelsmes valsts	GB
Harmonizētās sistēmas kods	8504 9090 00
Platums	73 mm
Augstums	199 mm
Dziļums	67 mm
Ar vadības elementu	-
Digitālo ieeju skaits	15
Digitālo izeju skaits	3
Analogo ieeju skaits	2
Analogo izeju skaits	2
Atbalsta protokols LON	No
Rūpniecisko Ethernet interfeisu skaits	2
HW interfeisu skaits RS-232	1
HW interfeisu skaits RS-422	0
HW interfeisu skaits RS-485	0
HW interfeisu sērijas TTY skaits	4
HW interfeisu skaits USB	1
Paralēlo HW interfeisu skaits	0
Citu HW interfeisu skaits	UN
Ar optisko interfeisu	No
Atbalsta protokols TCP/IP	Yes
Atbalsta protokols ASI	No
PROFIBUS atbalsta protokols	No
Atbalsta protokols CAN	No
INTERBUS atbalsta protokols	No
KNX atbalsta protokols	No
Modbus atbalsta protokols	No
Atbalsta protokols Data-Highway	No
Atbalsta protokols DeviceNet	No
SUCONET atbalsta protokols	No
Atbalsta protokols citām kopņu sistēmām	No
Ar datora savienojumu	Yes
SERCOS atbalsta protokols	No
INTERBUS drošības atbalsta protokols	No
Tīkla spriegums	UN V
Iespējama 4 kvadrantu darbība	-
PROFINET saskarņu skaits	2
Integrēta pārrāvuma pretestība	-
Pielietojums industriālajā zonā atļauts	-
Atļauts pielietot sadzīves un tirdzniecības zonās	-
Maks. izejas frekvence	UN Hz
Maks. izeja pie lineāras slodzes pie nominālā izejas sprieguma	UN kW
Maks. izeja pie kvadrātiskās slodzes pie nominālā izejas sprieguma	UN kW
Relatīvā simetriskā tīkla sprieguma pielaide	UN %
Relatīvā simetriskā tīkla frekvences pielaide	UN %
Atbalsta protokols AS-interfeisa drošībai darbā	No
DeviceNet Safety atbalsta protokols	No
Atbalsta protokols EtherNet/IP	Yes
Atbalsta protokols Foundation Fieldbus	No
PROFINET CBA atbalsta protokols	No
PROFINET IO atbalsta protokols	No
PROFIsafe atbalsta protokols	Yes
Atbalsta protokols SafetyBUS lpp	No
Maks. izejas spriegums	UN V
Nominālā izejas strāva I2N	UN A
Atbalsta protokols BACnet	No
Aizsardzības pakāpe (NEMA)	1

Iepakojuma līmenis 1

4042948664117

SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRIERT PROFINET SUPPORT OF VECTOR CONTROL, EASY POSITIONING EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI, 2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA EXTENDED SAFETY LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL PROTECTION IP20 USB- AND SD/MMC-INTERFACE Control Unit SINAMICS CU250S-2 PN Control Unit for high performance applications in general machinery construction for modular SINAMICS G120 inverters. The CU250S-2 Control Unit is part of the modular SINAMICS G120 inverter (comprising power unit, control unit, operator panel). The control unit is suitable for single-motor drives with high requirements placed on the speed control. Extended safety functions as well as a large number of I/O allow complex applications to be addressed. For vector control, two encoders (position and speed) can be connected. This extension allows the device to be used for hoist/swivel/gantry and slewing applications. The CU250S-2 Control Unit controls and monitors the power unit (Power Module) and the connected motors; several control modes can be selected. It facilitates communication to a local or central control system as well as to the monitoring equipment – and is used to connect all process-related auxiliary equipment and external components (sensors, valves, contactors, etc.) The comprehensive I/O interfaces, the fieldbus interfaces and the additional software functions optimally support its use in general machinery construction. The CU250S-2 is equipped as standard with the integrated safety functions Safe Torque Off (STO), Safe Stop 1 (SS1) and Safe Brake Control (SBC). Further, the integrated safety functions – Safely Limited Speed (SLS), Safe Speed Monitor (SSM) and Safe Direction (SDI) – can be enabled with the safety license. The following integrated communication versions are available: CU250S-2 with USS and Modbus RTU protocols, CU250S-2 DP PROFIBUS and CU250S-2 PN PROFINET, EtherNet/IP and CU250S-2 CANopen. The Control Unit can be operated with the following SINAMICS power units: PM240-2 (0.55 kW to 132 kW) and PM240 (up to 250 kW). SINAMICS - simply my drive!