SINAMICS PM240P-2, 3AC 380-480 V, 132,00 kW, IP20 / UL open type, FSF, A

Preces stāvoklis	Jauns
Ražotāja nosaukums	SINAMICS G120 POWER MODULE PM240P-2...
Zīmols	Siemens
Kategorijas	Vadības pārnesumkārba
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8504 4088 00
Platums	305 mm
Augstums	708 mm
Dziļums	357 mm
Ar vadības elementu	-
Digitālo ieeju skaits	UN
Digitālo izeju skaits	UN
Analogo ieeju skaits	UN
Analogo izeju skaits	UN
Atbalsta protokols LON	-
Rūpniecisko Ethernet interfeisu skaits	UN
HW interfeisu skaits RS-232	UN
HW interfeisu skaits RS-422	UN
HW interfeisu skaits RS-485	UN
HW interfeisu sērijas TTY skaits	UN
HW interfeisu skaits USB	UN
Paralēlo HW interfeisu skaits	UN
Citu HW interfeisu skaits	UN
Ar optisko interfeisu	-
Atbalsta protokols TCP/IP	-
Atbalsta protokols ASI	-
PROFIBUS atbalsta protokols	-
Atbalsta protokols CAN	-
INTERBUS atbalsta protokols	-
KNX atbalsta protokols	-
Modbus atbalsta protokols	-
Atbalsta protokols Data-Highway	-
Atbalsta protokols DeviceNet	-
SUCONET atbalsta protokols	-
Atbalsta protokols citām kopņu sistēmām	-
Aizsardzības pakāpe (IP)	IP20
Ar datora savienojumu	-
SERCOS atbalsta protokols	-
INTERBUS drošības atbalsta protokols	-
Tīkla spriegums	380-480 V
Iespējama 4 kvadrantu darbība	No
PROFINET saskarņu skaits	UN
Pārveidotāja veids	U pārveidotājs
Izvades fāžu skaits	3
Fāžu skaita ievade	3
Integrēta pārrāvuma pretestība	No
Pielietojums industriālajā zonā atļauts	Yes
Atļauts pielietot sadzīves un tirdzniecības zonās	No
Maks. izejas frekvence	550 Hz
Maks. izeja pie lineāras slodzes pie nominālā izejas sprieguma	110 kW
Maks. izeja pie kvadrātiskās slodzes pie nominālā izejas sprieguma	132 kW
Relatīvā simetriskā tīkla sprieguma pielaide	-10 %
Relatīvā simetriskā tīkla frekvences pielaide	5 %
Atbalsta protokols AS-interfeisa drošībai darbā	-
DeviceNet Safety atbalsta protokols	-
Atbalsta protokols EtherNet/IP	-
Atbalsta protokols Foundation Fieldbus	-
PROFINET CBA atbalsta protokols	-
PROFINET IO atbalsta protokols	-
PROFIsafe atbalsta protokols	-
Atbalsta protokols SafetyBUS lpp	-
Maks. izejas spriegums	UN V
Nominālā izejas strāva I2N	250 A
Atbalsta protokols BACnet	-

Iepakojuma līmenis 1

4042948673522

SINAMICS G120 POWER MODULE PM240P-2 WITH BUILT IN CL. A FILTER 3AC380-480V +10/-20% 47-63HZ OUTPUT HIGH OVERLOAD: 110KW FOR 150% 60S, 100% 240S; AMBIENT TEMP -20 TO +50 DEG C (HO) OUTPUT LOW OVERLOAD: 132kW FOR 135% 3S,110% 57S,100% 240S AMBIENT TEMP -20 TO +40 DEG C (LO) 708x 305x 357 (HXWXD), FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.7 SP6 HF1 Power Module SINAMICS PM240P-2 Power Module degree of protection IP20 for industrial applications in the process industries for the SINAMICS G120P frequency converter. The Power Modules are available for use in the water/waste water sector and for industrial applications. The new PM240P-2 Power Modules are based on a new hardware platform, which permits a higher power density. The PM240P-2 Power Modules are also suitable for use in safety-related applications. In conjunction with an external tripping unit (e.g. SIRIUS 3SK1), the drive becomes a Safety Integrated Drive with the safety function Safe Torque Off with a Safety Integrity Level of up to SIL 3. A further advantage of the Power Module is its ruggedness because it can also be used in severe ambient conditions, such as temperatures of -10° to 60° and in corrosive environments (resistance to pollution). Enhanced energy efficiency is also achieved with a higher output voltage (98 percent) due to an integrated DC link reactor. This Power Module does not contain an integrated braking chopper and the permissible cable lengths between the converter and the motor are limited. To permit longer cable lengths, output reactors can be connected. The PM240P-2 Power Modules in frame sizes FSD to FSF are available both with and without an integrated Class A line filter in a compact design in a three-phase voltage range of 380 V to 480 V and in a three-phase voltage range of 500 V to 690 V. The PM240P-2 Power Modules with an integrated Class A line filter are suitable for connection to TN systems. The Power Modules without an integrated line filter are suitable for connection to grounded TN/TT and ungrounded IT systems. Shield plates and shield connection kits are available for use when wiring the Control Units and Power Modules to ensure compliance with EMC guidelines. SINAMICS - simply my drive!