SINAMICS PM250, 3AC 380-480 V, 55,00 kW, IP20 / UL open type, FSF

Preces stāvoklis	Jauns
Ražotāja nosaukums	SINAMICS G120 POWER MODULE PM250 WI...
Zīmols	Siemens
Kategorijas	Vadības pārnesumkārba
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8504 4088 00
Platums	350 mm
Augstums	634 mm
Dziļums	316 mm
Ar vadības elementu	-
Digitālo ieeju skaits	UN
Digitālo izeju skaits	UN
Analogo ieeju skaits	UN
Analogo izeju skaits	UN
Atbalsta protokols LON	-
Rūpniecisko Ethernet interfeisu skaits	UN
HW interfeisu skaits RS-232	UN
HW interfeisu skaits RS-422	UN
HW interfeisu skaits RS-485	UN
HW interfeisu sērijas TTY skaits	UN
HW interfeisu skaits USB	UN
Paralēlo HW interfeisu skaits	UN
Citu HW interfeisu skaits	UN
Ar optisko interfeisu	-
Atbalsta protokols TCP/IP	-
Atbalsta protokols ASI	-
PROFIBUS atbalsta protokols	-
Atbalsta protokols CAN	-
INTERBUS atbalsta protokols	-
KNX atbalsta protokols	-
Modbus atbalsta protokols	-
Atbalsta protokols Data-Highway	-
Atbalsta protokols DeviceNet	-
SUCONET atbalsta protokols	-
Atbalsta protokols citām kopņu sistēmām	-
Aizsardzības pakāpe (IP)	IP20
Ar datora savienojumu	-
SERCOS atbalsta protokols	-
INTERBUS drošības atbalsta protokols	-
Tīkla spriegums	380-480 V
Iespējama 4 kvadrantu darbība	Yes
PROFINET saskarņu skaits	UN
Pārveidotāja veids	U pārveidotājs
Izvades fāžu skaits	3
Fāžu skaita ievade	3
Integrēta pārrāvuma pretestība	No
Pielietojums industriālajā zonā atļauts	No
Atļauts pielietot sadzīves un tirdzniecības zonās	No
Maks. izejas frekvence	550 Hz
Maks. izeja pie lineāras slodzes pie nominālā izejas sprieguma	45 kW
Maks. izeja pie kvadrātiskās slodzes pie nominālā izejas sprieguma	55 kW
Relatīvā simetriskā tīkla sprieguma pielaide	-10 %
Relatīvā simetriskā tīkla frekvences pielaide	5 %
Atbalsta protokols AS-interfeisa drošībai darbā	-
DeviceNet Safety atbalsta protokols	-
Atbalsta protokols EtherNet/IP	-
Atbalsta protokols Foundation Fieldbus	-
PROFINET CBA atbalsta protokols	-
PROFINET IO atbalsta protokols	-
PROFIsafe atbalsta protokols	-
Atbalsta protokols SafetyBUS lpp	-
Maks. izejas spriegums	UN V
Nominālā izejas strāva I2N	110 A
Atbalsta protokols BACnet	-

Iepakojuma līmenis 1

4019169457958

SINAMICS G120 POWER MODULE PM250 WITHOUT FILTER POSSIBILITY OF REGENERATION 3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 45KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP 0 TO +50 DEG C OUTPUT LIGHT OVERLOAD: 55KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP 0 TO +40 DEG C 634 X 350 X 316 (HXWXD), FSF PROTECTION IP20 WITHOUT CONTROL UNIT AND BOP Power Module SINAMICS PM250 Power Module with degree of protection IP20 for the SINAMICS G120 modular frequency converter. The Power Modules are suitable for numerous applications in general machine manufacturing. Any braking energy that occurs is fed directly back into the supply system (four-quadrant applications - no braking chopper required). The PM250 Power Module contains a worldwide unique technology, the Efficient Infeed Technology. With the regenerative capability implemented in this way, energy is fed back into the supply system in generator mode (electronic braking) and not dissipated in a braking resistor, which saves space in the cabinet. The work involved in dimensioning the braking resistor and the associated wiring is eliminated and the heat arising in the cabinet is also reduced. The innovative circuitry also reduces line harmonics and the use of an optional line reactor at the line input is unnecessary. This saves space and work in planning and procurement. The permissible cable lengths between the converter and the motor are limited. To be able to achieve longer cable lengths, output reactors can be connected. The PM250 Power Module is also suitable for use in safety-related applications. If combined with a failsafe control unit, the result is a Safety Integrated Drive. The PM250 Power Modules are available in a three-phase voltage range between 380 V and 480 V and in the frame sizes FSC to FSF. Frame sizes FSD to FSF are available both without and with an integrated Class A line filter. For frame size FSC with an integrated Class A line filter, there is an additional base filter to achieve Class B. The PM250 Power Modules with an integrated Class A line filter are suitable for connection to TN systems; those without an integrated line filter are suitable for connection to grounded TN/TT and ungrounded IT systems. Shield plates and shield connection kits are available for use when wiring the Control Units and Power Modules to ensure compliance with EMC guidelines. SINAMICS – simply my drive!