Technical Information
Preces stāvoklis |
Jauns |
Ražotāja nosaukums |
SIPLUS S7-1200 SB 1231 1AI RTD base... |
Zīmols |
Siemens
|
Kategorijas |
Programmējamie loģiskie kontrolieri
|
Izcelsmes valsts |
DE |
Harmonizētās sistēmas kods |
8538 9091 00
|
Platums |
38 mm |
Augstums |
62 mm |
Dziļums |
21 mm |
Piemērots drošības funkcijām |
No |
Analogo ieeju skaits |
1 |
Analogo izeju skaits |
0 |
Ieeja, strāva |
No |
Ieeja, spriegums |
Yes |
Ieeja, rezistors |
Yes |
Ievads, pretestības termometrs |
Yes |
Ieeja, termopāris |
No |
Ieejas signāls, konfigurējams |
Yes |
Izvade, strāva |
No |
Izeja, spriegums |
No |
Konfigurējams izejas signāls |
Yes |
Analogo ieeju izšķirtspēja |
15 Bit |
Analogo izeju izšķirtspēja |
UN Bit |
Elektriskā pieslēguma veids |
Skrūves/ atsperes skavas savienojums |
Eksplozijas drošības kategorija putekļiem |
Nav |
Papildu darbības aģents (ex ia) |
No |
Papildu darbības aģents (Ex ib) |
No |
Konfigurējamas analogās ieejas |
Yes |
Konfigurējamas analogās izejas |
Yes |
Iepakojuma informācija
Iepakojuma līmenis 1 |
4047618081102 |
Apraksts
SIPLUS S7-1200 SB 1231 1AI RTD based on 6ES7231-5PA30-0XB0 with conformal coating, -40…+60 °C, start up -25 °C, SIPLUS S7-1200, analog input, SB 1231RTD, 1 AI RTD, Pt100 and Pt1000 SIMATIC S7-1200 Basic Controller - Flexible thanks to wide variety of communication options If you only have to extend your SIMATIC S7-1200 CPU with a few inputs or outputs, signal boards are a good alternative to signal modules. Signal boards are plugged directly onto the front of the controller (also possible with the CPU 1211C) and are available as digital and analog input, output and hybrid modules. A communications board with an RS 485 interface is also available. Signal boards thus permit subsequent expansion of the configuration without requiring any further space in the control cabinet. Just like the CPU, the analog input modules are also protected against extreme ambient conditions. Due to the 100% conformal coating they can withstand biologically, chemically and physically active substances, condensation, frost, and corrosive gases. Regardless of the conditions, your analog signals are reliably recorded.