Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
soft starter for asynchronous motor, ATS48, 14 A, 208..690 V, 4..15 KW image 1

soft starter for asynchronous motor, ATS48, 14 A, 208..690 V, 4..15 KW

Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Noliktavas cena (bez PVN):
900,18 €
Šī cena ir spēkā līdz 24.12.24
EAN: 3389110982190
MPN: ATS48D17Y
Iepakojums: 1
Kaste: 8
Palete: 6

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums soft starter for asynchronous motor, ATS48, 14 A, 208..690 V, 4..15 KW
Zīmols Schneider Electric
Kategorijas Vadības pārnesumkārba
Izcelsmes valsts ID
Funkcija Viens virziens
Ar displeju No
Nominālais darba spriegums Ue 208-690 V
Nominālais vadības barošanas spriegums pie AC 50 Hz 110-230 V
Nominālais vadības barošanas spriegums pie AC 60 Hz 110-230 V
Aizsardzības pakāpe (IP) IP20
Atbrīvošanas klase Citi
Nominālā darba strāva Ie pie 40 °C Tu 17 A
Nominālā jauda trīsfāzu motors, inline, pie 230 V 4 kW
Nominālā jauda trīsfāzu motors, inline, pie 400 V 7.5 kW
Nominālā jauda trīsfāzu motors, trīsstūra iekšpusē, pie 230 V 0 kW
Trīsfāzu motora nominālā jauda, trīsstūra iekšpusē, pie 400 V 0 kW
Nominālā apkārtējā temperatūra bez pazemināšanas 40 °C
Integrēta motora pārslodzes aizsardzība Yes
Sprieguma veids iedarbināšanai AC/DC
Iekšējais apvedceļš No
Griezes momenta kontrole Yes

Iepakojuma informācija

Iepakojuma līmenis 1 3389110982190
Iepakojuma līmenis 2 3389110982190
Iepakojuma līmenis 3 3389110982199

Lejupielādes

Apraksts

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 17A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 15hp (at 575V) / 15kW (at 690V) for standards applications and 10hp (at 575V) / 11kW (at 690V) for severe applications. It weighs 4.9kg and its dimensions are, 160mm wide, 275mm high, 190mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.