soft starter for asynchronous motor, ATS48, 34 A, 208..690 V, 7.5..30 KW

Noliktavas cena (bez PVN):

905,91 €

Šī cena ir spēkā līdz 2024-12-24

Cena par m: 905,91 €

EAN: 3389110986198

MPN: ATS48D38Y

Mūsu noliktava: Nē Piegādātāja krājumi: Nē

Vienā iepakojumā: 1 Vienā kastē: N/A

Tehniskie dati

Preces stāvoklis	Jauns
Ražotāja nosaukums	soft starter for asynchronous motor, ATS48, 34 A, 208..690 V, 7.5..30 KW
Zīmols	Schneider Electric
Kategorijas	Vadības pārnesumkārba
Izcelsmes valsts	ID
Funkcija	Viens virziens
Ar displeju	No
Nominālais darba spriegums Ue	208.000-690.000 V
Nominālais vadības barošanas spriegums pie AC 50 Hz	110.000-230.000 V
Nominālais vadības barošanas spriegums pie AC 60 Hz	110.000-230.000 V
Aizsardzības pakāpe (IP)	IP20
Atbrīvošanas klase	Citi
Nominālā darba strāva Ie pie 40 °C Tu	38.000 A
Nominālā jauda trīsfāzu motors, inline, pie 230 V	9.000 kW
Nominālā jauda trīsfāzu motors, inline, pie 400 V	18.500 kW
Nominālā jauda trīsfāzu motors, trīsstūra iekšpusē, pie 230 V	0 kW
Trīsfāzu motora nominālā jauda, trīsstūra iekšpusē, pie 400 V	0 kW
Nominālā apkārtējā temperatūra bez pazemināšanas	40.000 °C
Integrēta motora pārslodzes aizsardzība	Yes
Sprieguma veids iedarbināšanai	AC/DC
Iekšējais apvedceļš	No
Griezes momenta kontrole	Yes

Iepakojuma informācija

Iepakojuma līmenis 1	3389110986198
Iepakojuma līmenis 2	3389110986197

Downloads

ECOP (Vides prakses kodekss) Deklarācija EPD (Vides produkta deklarācija) Tehniskā rokasgrāmata Lietošanas instrukcija

Apraksts

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 208V to 690V AC and up to 38A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. It is suitable for motors with power rating up to 30hp (at 575V) / 30kW (at 690V) for standards applications and 25hp (at 575V) / 22kW (at 690V) for severe applications. It weighs 4.9kg and its dimensions are, 160mm wide, 275mm high, 190mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.