Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
MD01 image 1

soft starter for asynchronous motor - ATS48 - 605 A - 230..415 V - 160..500 KW

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
7 659,16 €
Šī cena ir spēkā līdz 24.12.24
EAN: 3389110982510
MPN: ATS48C66Q
Iepakojums: 1
Palete: 1

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums soft starter for asynchronous motor - ATS48 - 605 A - 230..415 V - 160..500 KW
Zīmols Schneider Electric
Kategorijas Vadības pārnesumkārba
Izcelsmes valsts FR
Funkcija Viens virziens
Ar displeju No
Nominālais darba spriegums Ue 400-415 V
Nominālais vadības barošanas spriegums pie AC 50 Hz 220-415 V
Nominālais vadības barošanas spriegums pie AC 60 Hz 220-415 V
Aizsardzības pakāpe (IP) IP20
Atbrīvošanas klase Citi
Nominālā darba strāva Ie pie 40 °C Tu 660 A
Nominālā jauda trīsfāzu motors, inline, pie 230 V 0 kW
Nominālā jauda trīsfāzu motors, inline, pie 400 V 355 kW
Nominālā jauda trīsfāzu motors, trīsstūra iekšpusē, pie 230 V 315 kW
Trīsfāzu motora nominālā jauda, trīsstūra iekšpusē, pie 400 V 500 kW
Nominālā apkārtējā temperatūra bez pazemināšanas 40 °C
Integrēta motora pārslodzes aizsardzība Yes
Sprieguma veids iedarbināšanai AC/DC
Iekšējais apvedceļš No
Griezes momenta kontrole Yes

Iepakojuma informācija

Iepakojuma līmenis 1 3389110982510, 3389110982510

Lejupielādes

Apraksts

This Altistart 48 soft start/soft stop unit is a controller with 6 thyristors used for torque-controlled soft starting and stopping of three-phase asynchronous motors. It offers soft starting and deceleration functions along with machine and motor protection functions, as well as functions for communicating with control systems. It works at a rated supply voltage from 230V to 415V AC and up to 660A rating. Altistart 48 torque control enables starting without mechanical stress and smooth control of hydraulic transitions, with a single acceleration ramp making adjustments is quick and easy, whatever the load. If connected in the motor supply line it is suitable for motors with power rating up to 355kW (at 400V) for standards applications and 315kW (at 400V) for severe applications. If connected to the motor delta terminals it is suitable for motors with power rating up to 500kW (at 400V) for standards applications and 400kW (at 400V) for severe applications. It weighs 51.4kg and its dimensions are, 400mm wide, 670mm high, 300mm deep. It is designed for use in the most common applications for centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food and beverage and chemical industries. It complies with IEC/EN 60947-4-2 standard and is certified CE, UL, CSA, DNV, C-Tick, GOST, CCC, NOM, SEPRO, and TCF. The Altistart 48 is connected directly to the Modbus bus via its RJ45 connector port, It can also be connected to Ethernet, Fipio, Profibus DP and DeviceNet networks via a module (bridge or gateway) to order separately. It is designed to be mounted in vertical position (+/- 10 °) on a panel, thanks to 4 fixing holes. Altistart 48 delivers high performance with its Torque Control System (TCS) for controlled starting and deceleration, an easy integration in enclosures and control systems. This range provides also continual improvement of your machine operation by reducing mechanical or hydraulic stress and limiting energy loss and temperature rise, plus more.