2-channel timer with display and Bluetooth

Preces stāvoklis	Jauns
Ražotāja nosaukums	2-channel timer with display and Bluetooth
Zīmols	ELTAKO
Kategorijas	Releji
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8536 5080 00
Montāžas metode	DIN sliede
Platums	18 mm
Augstums	82 mm
Dziļums	58 mm
Kontaktu skaits	2
Atmiņas vietu skaits	60
Astro programma	Yes
Kanālu skaits	2
Radiovadāms	No
Iknedēļas programma	Yes
Gada programma	No
Kontakta veids	Normāli atvērts kontakts (NO)
GPS (globālā pozicionēšanas sistēma)	No
Platums moduļu atstarpju skaitā	1
60 minūšu programma	No
24h programma	Yes
Svētku programma	No
Izlases programma	Yes
Impulsu programma	No
Cikla programma	No
Tīkla sinhrons	No
Kvarca kontrolēts	Yes
Automātiska vasaras/ziemas laika pārslēgšana	Yes
Piemērots manuālai darbībai	Yes
Pārslēgšanas priekšizvēle	No
Barošanas sprieguma sprieguma veids	AC/DC
Potenciāli brīvs slēdža kontakts	Yes
Ārējā programmēšana	Yes
Radiovadāms (DCF77)	No
Barošanas spriegums	8-230 V
Stundu skaitītājs	No
Frekvences barošanas spriegums	50 Hz
Autonomija stundās	480
Īsākais pārslēgšanās laika kanāls 1	1 min
Īsākais pārslēgšanās laika kanāls 2	1 min
Nominālā pārslēgšanas strāva pie 250 V maiņstrāvas	16 A
Teksta norādījumi displejā	Yes
Aizsardzības pakāpe (IP)	IP20
Ārējā spiedpogu ieeja	Yes
Ar atmiņas karti	-
Maks. pārslēgšanas jaudas LED	200 W

Iepakojuma līmenis 1	4010312603277, 4010312603277
Iepakojuma līmenis 2	4010312603277
Iepakojuma līmenis 3	4010312603277

2-channel timer with display, Bluetooth and Eltako Connect app. Channel 1 with 1 potential-free NO contact 16A/250V AC and DX. Channel 2 with 1 potential-free OptoMOS semiconductor output 50mA/12..230V UC e.g. to control an electronic relay (ER) or a group impulse switch (EGS). With display lighting and astro function. Standby loss only 0.1-0.3 watts. Supply and control voltage for central control 12 to 230V UC. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. With the patented Eltako duplex technology (DX), the normally potential-free contact 1 can still switch at zero crossing when ­switching 230V/50Hz AC voltage and thus drastically reduce wear. To achieve this, simply connect the N ­conductor to the terminal (N) and L to 1(L). This results in an additional standby consumption of only 0.1 watt. Up to 60 timer memory locations are freely assigned to the channels. With date and automatic summer/winter time changeover. Ca. 7 days power reserve without battery. Each memory location can be assigned with the astro function (automatic switching after sunrise or sundown), the switch on/off time or a pulsed switching time (which triggers an impulse of 2 seconds). The astro switch on/off time can be changed up to ± 2 hours. A time lag of up to ± 2 hours influenced by the solstices can be entered additionally. With control input (+A1) for central control ON or OFF with priority. The timer is set either via Bluetooth with the app or with the MODE and SET buttons, a button lock is possible. The display lighting is switched on by pressing MODE or SET for the first time. 20 seconds after you last press MODE or SET, the program returns automatically to normal display and the display illumination goes off. Connect the timer to the app: Press SET, the display shows BLE (Bluetooth) and the ID of the timer. The connection to the app can now be established (delivery state PIN 123123). Scan the QR code on the operating instructions, the app guides you through the learning process. After the connection to the app has been established, BLE+ appears in the display. The MODE and SET buttons are now locked. After 20 minutes without interacting with the timer, the connection is automatically disconnected. Change PIN: The PIN for the Bluetooth connection can be changed in the app under the Device PIN entry. Bluetooth reset (delete any changed PIN): The connection to the app must be disconnected. Press MODE and SET simultaneously for 2 seconds, RES flashes in the display. Now press SET for 2 seconds, BLE appears in the display. If you confirm with SET, the bLE reset is carried out, the PIN is deleted and the delivery status is restored. Set the timer with the MODE and SET buttons: Set language: Every time the power supply is applied, press SET within 10 seconds to set the language and press MODE to confirm. D = German, GB = English, F = French, IT = ­Italian and ES = Spanish. The normal display then appears: weekday, time, day and month. Rapid scroll: In the following settings, the numerals scroll rapidly when you press and hold down Enter. Release then press and hold down to change the scroll direction. Set clock: Press MODE then at PRG (program) press SET to search for the CLK function. Press MODE to set. In H, press SET to select the hour and press MODE to confirm. In M proceed in the same way to set the minute. Set date: Press MODE then at PRG press SET to search for the DAT function. Press MODE to select. At Y, press SET to select the year and press MODE to confirm. Proceed in the same way at M to set the month and at D to set the day. The last setting in the sequence is MO (weekday) blinking. Press SET to set it and press MODE to confirm. Further settings like geographic position for astro function, manual switching ON or OFF, summer/winter time changeover, central control ON or OFF, random mode, keylock and entering of timer programs are described in the operating instructions.