dimm.act. 1-g 500 W/VA KNX DRA

Toote seisukord	Uus
Tootja nimi	dimm.act. 1-g 500 W/VA KNX DRA
Bränd	Gira
Päritoluriik	DE
Harmoneeritud süsteemi kood	8536 4900 00
Paigaldusviis	DRA (DIN liistule)
Mudel	Hämardi
Väljundite arv	1
Sagedus	50-60 Hz
Siinisüsteem KNX	Yes
Raadiosageduslik siinisüsteem	No
Siinisüsteem Powernet	No
Siiniühendusega	Yes
Koormuse liik	Universaalne
Suurim juhtimisvool	NA mA
Pinge	230 V
Laius mooduli arvudes	4
Muud siinisüsteemid	Puudub
Siinisüsteem LON	No
Alajaama sisend	Yes
Võimalik on paralleelne hooldus	No
Lokaaljuhtimine/käsijuhtimine	Yes
Väljundvõimsus	20-500 W
Kaitseaste (IP)	IP20
LED näidikuga	No
Võimendus on võimalik	No
Siinisüsteem KNX radio	No
Raadiosageduslik, kahesuunaline	-
Eemaldatav siini moodul	-
Sisseehitatud paigalduskarbi vähim sügavus	0 mm
Max. switching power LED	50 W

Pakkimistase 1

4010337082200

Dimming actuator, 1-gang for KNX 20 -500 W VA DRA plus Features: Dim actuator with integrated bus coupler. Switching and dimming of light bulbs, HV halogen lamps, dimmable HV-LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or NV-LED lamps, dimmable electronic transformers with LV halogen or NV-LED lamps. Automatic or manual selection of dimming principle according to load. Idle-state, short-circuit, and excess temperature-proof Manual actuation of the outputs independent of the bus (building site operation also possible). The dimming actuator, 1-gang can also be used as speed regulator for speed control of single-phase electric motors. Building site operation: Outputs can be operated manually without bus voltage with operating voltage only. Functions: Independent control of the dimming channels. For building site operation, outputs can be operated manually without bus voltage with operating voltage only. Central switching function for control of all dimming channels. Delay for actively transmitted feedback messages following bus voltage recovery. Load type and dimming method can be configured: Universal (with automatic calibration procedure), electronic transformer LV LED (capacitive phase cut), conventional transformer LV LED (inductive phase cut), HV LED (phase cut) or HV LED (phase cut). Feedback for "switching" and "brightness value". Dimmable brightness range can be set. Dimming behaviour and dimming characteristics can be parameterised. Switch-on behaviour for a relative dimming command can be parameterised. Bulb-saving switch-on and switch-off Automatic setting and scaling of the dimmable brightness range when using universal power boosters. The performance of a dimming channel in the "OFF" state during reception of a relative dimming command can be parameterised (switching and dimming or no response). Alarm telegrams for short circuit, overload, and load failure. Feedback of connected load type. Block function or forced setting function can be parameterised for each output. Time functions (switch-on off delay, staircase light function). Staircase light function with advance warning function via time-controlled reduction of lighting or activation of permanent lighting. Linking function and up to eight scenes per dimming channel possible. Elapsed operating time meter for recording switch-on time. Reactions after bus voltage failure and recovery can be set. Notes : Power extension using Gira power boosters. Installation on DIN top-hat rail. VDE approval in accordance with EN 60669-1, EN 60669-2-1.