Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
TREKKOORDSCH.NOODSTOP RECHT 2NC M20 image 1
Telemecanique

TREKKOORDSCH.NOODSTOP RECHT 2NC M20

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
31,25 €
Hind kehtib kuni 24.12.24
EAN: 3389119619530
MPN: XY2CJS17H29
Pakend: 1

Technical Information

Toote seisukord Uus
Tootja nimi TREKKOORDSCH.NOODSTOP RECHT 2NC M20
Bränd Telemecanique
Kategooriad Juhtimisseadmed, nupud
Päritoluriik ID
Harmoneeritud süsteemi kood 8536 5080 00
Värvus Punane
Ümbrustemperatuur -25-70 °C
Käivitamise suundi 0
Kaitseaste (IP) IP67/IP69K
Tõmbenööri pikkus 20 m
Normaalselt suletud kontaktide arv 2
Normaalselt avatud kontaktide arv 0
Ümberlülituskontaktide arv 0
Tõmbepinge näidikuga No

Pakendamise üksikasjad

Pakkimistase 1 3389119619530

Kirjeldus

This product is part of the XY2C range, an offer of emergency stop rope pull switches. This emergency stop rope pull switch has 2 normally closed, slow-break contacts with positive opening operation. It is a switch with a rated operational current of 0.1A at 250V AC, 1.5A at 240V AC and a conventional enclosed thermal current of 10A. It is furnished with screw clamp terminals for electrical connection and 1 tapped entry for ISO M20 cable gland. The trigger cable anchor point at left hand side. It can reset by booted pull button. It offers long mechanical durability which is about 100000 operating cycles. It is an IP66 and IP67 rated product. The casing is made of Zamak (red) with stainless steel cover. Its dimensions are 40mm (Width) x 64.2mm (Depth) x 201mm (Height) and weighs 0.455kg. It is intended for all machine applications like woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc. This product is certified by CCC, CSA and UL. It meets CSA C22.2 No 14, EN/ISO 13850, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/IEC 60947-5-5, UL 508 Machinery directive 2006/42/EC and Work equipment directive 2009/104/EC standards. These emergency stop rope pull switches can be equipped with trip indicators, cable tension adjustment can be performed using a turnbuckle. The emergency stop rope pull switch is intended for all machines requiring stopping of dangerous movement in the immediate vicinity of the machine. The emergency stop rope pull switch is designed to avert hazards (dangerous phenomena) at the earliest possible moment or to reduce risks which could cause injury to persons or damage either to machines or work in progress.