Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
TREKKOORDSCH.NOODSTOP RECHT 2NC M20 image 1
Telemecanique

TREKKOORDSCH.NOODSTOP RECHT 2NC M20

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
33,26 €
Šī cena ir spēkā līdz 03.01.25
EAN: 3389119619530
MPN: XY2CJS17H29
Iepakojums: 1

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums TREKKOORDSCH.NOODSTOP RECHT 2NC M20
Zīmols Telemecanique
Kategorijas Vadības ierīces, pogas
Izcelsmes valsts ID
Harmonizētās sistēmas kods 8536 5080 00
Krāsa Sarkans
Apkārtējās vides temperatūra -25-70 °C
Darbības virzienu skaits 0
Aizsardzības pakāpe (IP) IP67/IP69K
Maks. vilkšanas auklas garums 20 m
Kontaktu skaits kā parasti slēgtam kontaktam 2
Kontaktu skaits kā parasti atvērtam kontaktam 0
Kontaktpersonu skaits kā maiņas kontaktpersona 0
Ar spriedzes indikāciju No

Iepakojuma informācija

Iepakojuma līmenis 1 3389119619530

Apraksts

This product is part of the XY2C range, an offer of emergency stop rope pull switches. This emergency stop rope pull switch has 2 normally closed, slow-break contacts with positive opening operation. It is a switch with a rated operational current of 0.1A at 250V AC, 1.5A at 240V AC and a conventional enclosed thermal current of 10A. It is furnished with screw clamp terminals for electrical connection and 1 tapped entry for ISO M20 cable gland. The trigger cable anchor point at left hand side. It can reset by booted pull button. It offers long mechanical durability which is about 100000 operating cycles. It is an IP66 and IP67 rated product. The casing is made of Zamak (red) with stainless steel cover. Its dimensions are 40mm (Width) x 64.2mm (Depth) x 201mm (Height) and weighs 0.455kg. It is intended for all machine applications like woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc. This product is certified by CCC, CSA and UL. It meets CSA C22.2 No 14, EN/ISO 13850, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/IEC 60947-5-5, UL 508 Machinery directive 2006/42/EC and Work equipment directive 2009/104/EC standards. These emergency stop rope pull switches can be equipped with trip indicators, cable tension adjustment can be performed using a turnbuckle. The emergency stop rope pull switch is intended for all machines requiring stopping of dangerous movement in the immediate vicinity of the machine. The emergency stop rope pull switch is designed to avert hazards (dangerous phenomena) at the earliest possible moment or to reduce risks which could cause injury to persons or damage either to machines or work in progress.