WAGO Installation - Lk 129

End and intermediate plate 1 mm thick for quadruple-deck terminal bloc

WAGO

Separator plate 1 mm thick 3 mm oversized orange

End and intermediate plate 2.5 mm thick light gray

End and intermediate plate 2.5 mm thick gray

Jumper insulated IN = IN terminal block gray

Protective warning marker for 5 terminal blocks with high-voltage symb

End and intermediate plate 2.5 mm thick orange

Protective warning marker for 5 terminal blocks with high-voltage symb

Spacer module modular bridging commoned terminal blocks gray

Operating tool made of insulating material 5-way

Jumper insulated IN = IN terminal block gray

Operating tool made of insulating material 2-way white

4-conductor sensor supply terminal block with ground contact with end

4-conductor sensor supply terminal block LED (green) for PNP-(high-sid

4-conductor sensor terminal block with colored conductor entries 2.5 m

4-conductor sensor terminal block LED (red) for PNP-(high-side) switch

4-conductor sensor supply terminal block LED (green) for PNP-(high-sid

3-conductor actuator supply terminal block with colored conductor entr

4-conductor sensor terminal block LED (red) for NPN-(low-side) switchi

4-conductor sensor supply terminal block with colored conductor entrie

2-conductor actuator terminal block with colored conductor entries 2.5

4-conductor sensor supply terminal block with colored conductor entrie

4-conductor sensor supply terminal block LED (green) Power supply from

4-conductor sensor terminal block for PNP (positive) switching sensors

2-conductor actuator supply terminal block with colored conductor entr

2-conductor actuator supply terminal block with ground contact with co

2-conductor actuator supply terminal block with colored conductor entr

2-conductor through terminal block 2.5 mm² lateral marker slots gray

4-conductor sensor terminal block for PNP (positive) switching sensors

Triple-deck terminal block 6-conductor ground terminal block 2.5 mm² g

2-conductor through terminal block 2.5 mm² suitable for Ex i applicati

4-conductor through terminal block 2.5 mm² suitable for Ex i applicati

4-conductor carrier terminal block for DIN-rail 35 x 15 and 35 x 7.5 2

4-conductor through terminal block 2.5 mm² center marking orange

Terminal block for pluggable modules 4-pole with 4-conductor terminal

2-conductor ground terminal block 2.5 mm² suitable for Ex e II applica

3-conductor carrier terminal block for DIN-rail 35 x 15 and 35 x 7.5 2

2-conductor disconnect terminal block for DIN-rail 35 x 15 and 35 x 7.

2-conductor ground terminal block 2.5 mm² lateral marker slots green-y

Terminal block for pluggable modules 6-pole with 4-conductor terminal

Component terminal block 2-conductor with diode 1N4007 gray

2-conductor disconnect terminal block for DIN-rail 35 x 15 and 35 x 7.

Component plug for carrier terminal blocks 2-pole gray

Terminal block for pluggable modules 8-pole with 4-conductor terminal

Component plug for carrier terminal blocks 2-pole gray

Terminal block for pluggable modules 10-pole with 4-conductor terminal

Component plug for carrier terminal blocks 2-pole gray

Component plug for carrier terminal blocks 2-pole gray

Empty component plug housing 10 mm wide 2-pole gray

Component plug 2-pole LED (red) gray

Component plug 2-pole with diode 1N4007 gray

Component plug 2-pole LED (red) gray

Empty component plug housing 10 mm wide Type 4 gray

Component plug 2-pole LED (red) gray

Component plug 2-pole 10 mm wide gray

Component plug 2-pole LED (red) gray

Component plug 2-pole with rectifier diode and LED gray

Empty component plug housing 10 mm wide Type 3 gray

Component plug 2-pole 10 mm wide gray

Component plug 2-pole with rectifier diode and LED gray

WAGO Paigaldamine - Lk 129