Universal dimmer switch without N connection, especially for LED Power, MOSFET up to 200W

Prekės būklė	Nauja
Gamintojo pavadinimas	Universal dimmer switch without N connection, especially for LED Power, MOSFET up to 200W
Prekės ženklas	ELTAKO
Kategorijos	Jungikliai
Kilmės šalis	CN
Suderintos sistemos kodas	8536 5080 00
Kompleksinio bloko išdėstymas	Kita
Veikimo metodas	Prisilietimo valdymo mygtukas
Apkrovos tipas	Universalus
Nominali įtampa nuo / iki	230 V
Įrenginio plotis	45 mm
Įrenginio aukštis	45 mm
Įrenginio gylis	18 mm
Maks. perjungimo maitinimo šviesos diodas	200 W

Pakavimo lygis 1	4010312109618, 4010312109618
Pakavimo lygis 2	4010312109618
Pakavimo lygis 3	4010312109618

Montavimo metodas	Apatinis sluoksnis (tinko)
Spalva	Mėlynas
Be halogeno	Yes
Jungties tipas	Prisukamas gnybtas
Paviršiaus apdorojimas	Neapdorotas
Medžiagos kokybė	Termoplastikas
Medžiaga	Plastikinis
Tvirtinimo tipas	Įrengimas su varžtu
Šviesos vertės atmintis	Yes
Pastotės įvestis	No
Nuoseklioji užtamsinimo sistema	No
Naudotinas su judesio davikliu	No
Naudotinas su perdavimo mygtuku	No
Naudotinas su infraraudonųjų spindulių mygtuku	No
Naudotinas su buvimo rodmeniu	No
Naudotinas su mygtuku	Yes
Naudotinas su laiko jungikliu / laikmačiu	No
Kontrolinė įtampa nuo / iki	230 V
Permatomas	No
Paviršiaus tipas	Kilimėlis
Šerdies kryžminė sekcija nuo / iki	4 mm²
Galimas IFTTT palaikymas	No
Neryškus fazės nutrūkimas	Yes
Neryškus fazės dalijimas	Yes
Mažiausias įmontuoto įrenginio gylis	18 mm
App valdymas per Bluetooth	No
Vardinės galios apkrova	200 W
Nominalios galios talpinė apkrova	200 VA
Suderinamas su Apple HomeKit	No
Suderinamas su Google Assistant	No
Suderinamas su Amazon Alexa	No

Without N connection, POWER MOSFET up to 200W. Standby loss 0.5 watt only. With control inputs for pushbutton light switches and light switches. With adjustable minimum brightness, dimming technology and dimming speed. For installation. 45mm long, 45mm wide, 18mm deep. Universal dimmer switch for R and C loads up to 200W, depending on ventilation conditions. Dimmable 230V LED lamps and energy saving lamps ESL in trailing edge mode up to 200W or up to 40W in leading edge mode, depending on ventilation conditions. If 230V LED lamps are lightly glowing when they are turned off, a GLE base load must be installed parallel to the lamp. It is not permited to connect L loads (inductive loads, like wounded transfomers). Zero passage switching with soft start and soft OFF to protect lamps. Control voltage, supply ­voltage and switching voltage 230V. Min. load 4W. Short-time control commands switch on/off, permanent control varies the brightness up to the maximum level. A short interruption of control changes the direction of dimming. The brightness level is stored after switching off (memory). It is possible to deactivate the memory function by turning 3 times the upper rotary switch to the right stop (max), then it is compatible with ESL. To re­activate the memory function (factory setting), turn the upper rotary switch 3 times to the left stop (min). In case of a power failure the switching position and the brightness level are stored, and will switch on after the failure if applicable. Automatic electronic overload protection and over-temperature switch-off. The minimum brightness level (completely dimmed down) can be adjusted with the upper rotary switch %lamp. The lower rotary switch allows to choose between the both dimming technologies, P-AN leading or P-AB trailing edge and to change the dimming speed. Simultaneously the duration of soft on and soft off will be adjusted. If light switches cannot be replaced by pushbutton light switches, there is a separate control input for light switches: If the switch is opened briefly after closing, the light is dimmed until the next time it is opened again briefly. The dimming direction changes automatically at both peaks. The dimming direction can also be changed by opening the switch briefly twice. Switching operation for children's rooms (only if controlled by pushbutton light switch): If the light is switched on by holding down the pushbutton, it starts at the lowest brightness level after approx. 1 second and dims up slowly as long as the pushbutton is held down without modifying the last stored brightness level. Snooze function (only if controlled by pushbutton light switch): With a double impulse the lighting is dimmed down from the current dimming position to the minimum brightness level and switched off. The current dimming position as well as the adjustable minimum brightness level determine the dimming time (max. = 60 minutes) which can be reduced as required. It can be switched off at any time by short-time control commands during the lighting is dimmed down. Holding down the pushbutton during the dimming down process dims up and stops the snooze function. Without N connection, therefore suitable for mounting directly behind the pushbutton light switch or light switch, even if no N wire is available.