Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
1- and 2-level wireless repeater image 1
ELTAKO

1- and 2-level wireless repeater

Yra sandėlyje: Ne Pardavėjo atsargos: Ne Minimalus užsakymo kiekis: 1
Kaina (be PVM):
81,82 €
Ši kaina galioja iki 31.12.24
EAN: 4010312306482
MPN: 30000352
Pakuotė: 1

Technical Information

Prekės būklė Nauja
Gamintojo pavadinimas 1- and 2-level wireless repeater
Prekės ženklas ELTAKO
Kategorijos Jutikliai
Kilmės šalis CN
Suderintos sistemos kodas 8526 9200 00
Nominali įtampa 230 V
Montavimo metodas Viršutinis sluoksnis (tinko)
EIB / KNX magistralės sistema No
Magistralės sistemos radijo dažnis Yes
„Powernet“ magistralės sistema No
Kitos maršrutinės sistemos Nėra
LON magistralinė sistema No
Saugos laipsnis (IP) IP20
KNX radijo magistralės sistema No

Pakavimo informacija

Pakavimo lygis 1 4010312306482, 4010312306482
Pakavimo lygis 2 4010312306482
Pakavimo lygis 3 4010312306482

Atsisiuntimai

Gilios nuorodos į produkto puslapį

Aprašymas

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 is connectable as required. Mounting in the 230V power supply cord, e.g. in false ceilings. 100mm long, 50mm wide and 25mm deep. This repeater is only needed if the building conditions prevent undisturbed reception or the ­distance between the wireless pushbutton and receiver is too great. Antenna FA250 with 250cm cable is connectable instead of the enclosed antenna. The range can be extended considerably by placing it in the optimum position. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from ­sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.