1- and 2-level wireless repeater

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

81,82 €

This price is valid until 31.12.24

EAN: 4010312306482

MPN: 30000352

Package: 1

Technical Information

Item condition	New
Manufacture name	1- and 2-level wireless repeater
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Nominal voltage	230 V
Mounting method	Surface mounted (plaster)
Bus system KNX	No
Bus system radio frequent	Yes
Bus system Powernet	No
Other bus systems	None
Bus system LON	No
Degree of protection (IP)	IP20
Bus system KNX radio	No

Packing details

Packing level 1	4010312306482, 4010312306482
Packing level 2	4010312306482
Packing level 3	4010312306482

Downloads

Deep link product page

Description

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 is connectable as required. Mounting in the 230V power supply cord, e.g. in false ceilings. 100mm long, 50mm wide and 25mm deep. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. Antenna FA250 with 250cm cable is connectable instead of the enclosed antenna. The range can be extended considerably by placing it in the optimum position. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.