Avaleht
ELTAKO
1- and 2-level wireless repeater

1- and 2-level wireless repeater

Laohinnas (käibemaksuta):

81,82 €

Hind kehtib kuni 2024-12-31

Hind m kohta: 81,82 €

EAN: 4010312306482

MPN: 30000352

Meie ladu: Ei Hankija laovaru: Ei

Pakendi kohta: 1 Kasti kohta: 1 Kaubaaluse kohta: N/A

Tehnilised andmed

Toote seisukord	Uus
Tootja nimi	1- and 2-level wireless repeater
Bränd	ELTAKO
Kategooriad	Andurid
Päritoluriik	CN
Harmoneeritud süsteemi kood	8526 9200 00
Nimipinge	230 V
Paigaldusviis	Pinnapealne
Siinisüsteem KNX	No
Raadiosageduslik siinisüsteem	Yes
Siinisüsteem Powernet	No
Muud siinisüsteemid	Puudub
Siinisüsteem LON	No
Kaitseaste (IP)	IP20
Siinisüsteem KNX radio	No

Pakendamise üksikasjad

Pakkimistase 1	4010312306482, 4010312306482
Pakkimistase 2	4010312306482
Pakkimistase 3	4010312306482

Downloads

Toote lehe süvalink

Kirjeldus

1 and 2 level wireless repeater with small antenna and with antenna FA250. Only 0.6 watt standby loss. A wireless antenna FA250 is connectable as required. Mounting in the 230V power supply cord, e.g. in false ceilings. 100mm long, 50mm wide and 25mm deep. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. Antenna FA250 with 250cm cable is connectable instead of the enclosed antenna. The range can be extended considerably by placing it in the optimum position. The 1-level mode is activated ex works. Only wireless signals from sensors are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Use the rotary switch to switch over to 2 level mode. Then the wireless signals from sensors and from another 1 level repeater are processed. A signal may therefore be received and amplified twice. The LED indicates incoming wireless signals by flashing briefly. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area.