Registruokitės, kad atrakintumėte savo išskirtines B2B kainas ir pradėtumėte apsipirkinėti. Užsiregistruokite dabar!
Powerline actuator 2 channels with 2 sensor inputs
Yra sandėlyje: Ne
Pardavėjo atsargos: Ne
Minimalus užsakymo kiekis: 1
Kaina (be PVM):
94,43 €
EAN: 4010312316672
MPN: 31200001
Pakuotė: 1
Technical Information
| Prekės būklė | Nauja |
| Gamintojo pavadinimas | Powerline actuator 2 channels with 2 sensor inputs |
| Prekės ženklas | ELTAKO |
| Kategorijos |
Jutikliai
|
| Kilmės šalis | CN |
| Suderintos sistemos kodas | 8526 9200 00 |
| Montavimo metodas | Apatinis sluoksnis (tinko) |
| Nustatyta srovė | 5 A |
| Išeigos galia | 1000 W |
| Nominali operacinė įtampa | 230 V |
| EIB / KNX magistralės sistema | No |
| Magistralės sistemos radijo dažnis | No |
| „Powernet“ magistralės sistema | Yes |
| Maks. perjungimo galia | 1000 W |
| Įtraukta magistralės jungtis | Yes |
| Maks. perjungiamų kontaktų skaičius | 2 |
| Maks. perjungimo srovė | 5 A |
| Kitos maršrutinės sistemos | Nėra |
| LON magistralinė sistema | No |
| C apkrova | Yes |
| Prijungiamas prie skirtingų fazių | No |
| Lokali operacija / rankos operacija | Yes |
| Su LED rodmeniu | Yes |
| Modulinis praplečiamumas | No |
| KNX radijo magistralės sistema | No |
| Dvikryptis radijas | No |
| Nuimamas magistralės (šynos) modulis | No |
| Mažiausias įmontuoto įrenginio gylis | 25 mm |
Pakavimo informacija
| Pakavimo lygis 1 | 4010312316672, 4010312316672 |
| Pakavimo lygis 2 | 4010312316672 |
| Pakavimo lygis 3 | 4010312316672 |
Atsisiuntimai
Aprašymas
Powerline actuator with 2 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. Used as impulse switch or relay. 1+1 NO contacts not potential free 5A/250V AC, incandescent lamps 1000 watts. 2 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at the same place. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above it is a slide switch which acts as a configuration switch with positions 0, 1 and 2. Position 0: Sensor inputs function as pushbuttons (impulse switches). Position 1: Sensor input functions as NC contact (relay). Position 2: A change-over switch is evaluated as a pushbutton. All entries and configurations can also be accessed via the mains using the PC software SIENNA Professional. This means that another configuration can also be set that is not available via the rotary switches: Position 3: Sensor input acts as NO contact (relay inverse). To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². Next to them are three wires with wire end-sleeves for the two control inputs with internal low voltage.