KNX 8XJALOEZIE/16X ACTOR, 10A MAN.BED.

Preces stāvoklis	Jauns
Ražotāja nosaukums	KNX bl.sw.act.REG-K/8x/16 /10 w.man.mode
Zīmols	Schneider Electric
Kategorijas	Sensori
Izcelsmes valsts	DE
Montāžas metode	DRA (adapteris uz DIN sliedes)
Strāvas veids	AC
Ievadu skaits	0
Autobusu sistēma KNX	Yes
Autobusu sistēmas radio bieži	No
Autobusu sistēma Powernet	No
Maks. pārslēgšanas jauda	2000 W
Ar autobusa savienojumu	Yes
Maks. žalūziju izeju skaits	8
Pārslēgšanas strāva (pretestība)	10 A
Platums moduļu atstarpju skaitā	8
Citas autobusu sistēmas	Nav
Autobusu sistēma LON	No
Vietējā darbība/rokas darbība	Yes
Ar slēdža funkciju	Yes
Aizsardzības pakāpe (IP)	IP20
Ar LED indikāciju	Yes
Autobusu sistēma KNX radio	No
Radio bieži divvirzienu	No
Autobusa modulis noņemams	No
Min. iebūvētās instalācijas kastes dziļums	0 mm

Iepakojuma līmenis 1	3606485012018
Iepakojuma līmenis 2	3606485012016

For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. The bus is connected using a bus connecting terminal. A data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation. With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary. Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. 8-bit positioning for height and slats. Scenes. Status and feedback function. Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel. Nominal voltage: AC 100-240 V ±10%. Operating voltage: min. AC 90 V - max. AC 265 V. Mains frequency: 50-60 Hz ±10%. For each blind output: Nominal current: 10 A, inductive load cos Phi 0.6. Motor load: AC 100 V, max. 434 W. AC 230 V, max. 1000 W. AC 240 V, max. 1043 W. For each switch output: Nominal current: 10 A, ohmic load cos Phi 1. 10 A, inductive load cos Phi 0.6. Nominal load. Incandescent lamps: AC 100 V, max. 869 W. AC 230 V, max. 2000 W. AC 240 V, max. 2086 W. Halogen lamps: AC 100 V, max. 739 W. AC 230 V, max. 1700 W. AC 240 V, max. 1773 W. Fluorescent lamps: AC 100 V, max. 434 VA.AC 230 V, max. 1000 VA. AC 240 V, max. 1043 VA. parallel-compensated. Capacitive load: AC 230 V, 10 A, max. 105 µF. External auxiliary voltage: Nominal voltage: AC 110-240 V ±10%. Device width: 8 modules, approx. 144 mm. Contents: With bus connecting terminal and cable cover. Colour: light grey.