Omron Automatics and control - Lapa 325

Omron

Power supply for PFB series

CCS Coaxial Light Joint Bracket

Bracket for HLDL3 series

LED Backlight, active area 100 x 150 mm, Red 630 nm, 24 V, continuous mode

1 493,37 €

1 493,37 € par vienību

2 197,68 € par vienību

Wireless Full guard button, dia. 34.4 mm, EU frequency 868.3 MHz, Button/flange colors black-red

Mounting bracket for LDL2-80X16

Mounting bracket for LDL2-74X30

Extension cable for CCS 12V lighting, 5m

Camera Protective Housing for FZ_SQ100N, FZ_SQ050F and similar, Stainles Steel 1.4404, IP69

2 216,51 €

2 216,51 € par vienību

LED backlight, 200mm x 200mm, Red, 24VDC, M12 connector

1 751,87 €

1 751,87 € par vienību

Clamping mechanics for TCxx036 lenses and LTCLHP036-X illuminators

1SA Safe brake control connector (CN15)

1S main circuit connector A (CNA) for 230 V, 1.5 to 3 kW and 400 V, 0.6 to 3 kW

1S main circuit connector A (CNA) for 400 V, 5.5 to 7.5 kW

1S main circuit connector B (CNB) for 400 V, 5.5 to 7.5 kW

1S main circuit connector A (CNA) for 400 V,15 kW

1S connector for power cable (motor side); for 100-750 W, 230 V motors

1S connector for brake cable (motor side)

External regeneration resistor, capacity: 24 W, 25 Ohm

Resistor: 640 W, 66 Ohm

1 291,14 €

1 291,14 € par vienību

External regeneration resistor, capacity: 60 W, 16 Ohm

External regeneration resistor, capacity: 60 W, 25 Ohm

External regeneration resistor 60 W, 20 Ohm

1S series cable clamp L. Used in 400 V drives (from 5.5 kW to 15 kW)

Magnet mounting attachment for vibration sensor

External regeneration resistor, capacity: 60 W, 33 Ohm

1SA series cable shield clamp S. Used in 230V and 400 V drives

Wireless Mushroom button, dia. 40 mm, EU frequency 868.3 MHz, Button/flange colors black-yellow

Wireless Mushroom button, dia. 40 mm, EU Frequency 868.3 MHz, Button/flange colors black-red

Soft-NA, for Windows 10 Pro 64 bit, 3 x USB Dongle License

5 303,72 €

5 303,72 € par vienību

Power cable, PVC, 7/8 inch socket (female) to discrete wire, right angle, 10 m

Power cable, PVC, 7/8 inch socket (female) to 7/8 inch plug (male), right angle, 2 m

Power cable, PVC, 7/8 inch socket (female) to 7/8 inch plug (male), right angle, 5 m

Power cable, PVC, 7/8 inch socket (female) to 7/8 inch plug (male), right angle, 1 m

Power cable, PVC, 7/8 inch socket (female) to 7/8 inch plug (male), right angle, 10 m

NJ1 SQL Controller Promotion Kit

3 370,29 €

3 370,29 € par vienību

1S AC servo motor, 2 kW, 400 VAC, 3000 rpm, 6.37 Nm, absolute encoder, no key

1 944,95 €

1 944,95 € par vienību

1S AC servo motor, 50 W, 230 VAC, 3000 rpm, 0.159 Nm, absolute encoder

1S AC servo motor, 100 W, 230 VAC, 3000 rpm, 0.318 Nm, absolute encoder, no key

1S AC servo motor, 100 W, 230 VAC, 3000 rpm, 0.318 Nm, absolute encoder, with oil seal

1S series servo encoder cable, 45 m, 230 V: 100-750 W

1S AC servo motor, 400 W, 230 VAC, 3000 rpm, 1.27 Nm, absolute encoder, with brake and oil seal

1 353,93 €

1 353,93 € par vienību

Sysmac NX1 Modular CPU with Time Series Data Collection, 5MB program and 33.5MB data memory , built-in EtherCAT (0 servo axes, 4 PTP axes, total 64 EtherCAT nodes), 2 Ethernet ports (OPC-UA and EtherNet/IP)

2 480,24 €

2 480,24 € par vienību

CK3W End Cover (One End Cover is already provided with the CK[]M-CPU1[]1 CPU Unit. Order CK3W-TER11 only for additional ones)

Sysmac NX power supply unit, 24 VDC, 70 W, "RUN" output relay

Sysmac NX power supply unit, 100 to 240 VAC, 90 W, "RUN" output relay

CK3M CPU, 1 GB RAM, 1 GB Flash, No ECAT, Up to two axis interface units can be connected

1 855,47 €

1 855,47 € par vienību

SD Memory Card, 16 GB

Sysmac NX7 CPU with Time Series Data Collection, 80MB memory, built-in EtherCAT (128 servo axes, in total 512 EtherCAT nodes) and 2 EtherNet/IP port

7 029,42 €

7 029,42 € par vienību

1S series servo flexible brake cable, 3 m, 230 V: 50 to 750 W, reverse/non-load mounting

1S series servo encoder cable, 45 m, 230 V: 900 W - 1.5 kW, 400 V: 400 W - 3 kW

1S series servo motor power cable, 0.7 m, 230 V: 100 to 750 W

Omron Automātika un vadība - Lapa 325