S3000 electr.swit.ins. Insert

Preces stāvoklis	Jauns
Zīmols	Gira
Kategorijas	Gaismas slēdži
Izcelsmes valsts	DE
Harmonizētās sistēmas kods	8536 5080 00
Nominālais spriegums	0 V
Montāžas metode	Iebūvējams vienā līmenī (apmetums)
Krāsa	Citi
Biežums	NA Hz

Iepakojuma līmenis 1	4010337048299
Iepakojuma līmenis 2	4010337048299

Montāžas izkārtojums	Pamata elements
Modelis	Citi
Virsmas aizsardzība	Citi
Nominālā strāva	0 A
Kanālu skaits	NA
Materiāla kvalitāte	Citi
Slodzes veids	Citi
Materiāls	Citi
Stiprinājuma veids	Montāža ar knaiblīti un skrūvi
Gaismas vērtību atmiņa	No
Apakšstacijas ieeja	-
RAL numurs (līdzīgs)	0
Slēdža jauda HVAC	NA W
Piemērojams ar kustību sensoru	-
Piemērojams ar pārraides pogu	-
Piemērojams ar infrasarkano pogu	No
Piemērojams ar klātbūtnes indikatoru	-
Piemērojams ar pogu	Yes
Piemērojams ar laika slēdzi/taimeri	No
Slēdža jauda	NA W
Caurspīdīgs	No
Ir pieejams IFTTT atbalsts	No
Min. iebūvētās instalācijas kastes dziļums	0 mm
Savietojams ar Apple HomeKit	No
Savietojams ar Google palīgu	No
Savietojams ar Amazon Alexa	No

System 3000 electronic switching insert Features: Connecting auxiliary units is possible. Control of thermal servos in combination with a room temperature controller top unit. Bulb-saving switch-on. Electronic short-circuit protection. Electronic excess-temperature protection. Operation with and without neutral conductor connection. Operation with a neutral conductor: Switching of light bulbs, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, switchable or dimmable HV LED lamps or compact fluorescent lamps. Device is powered via the phase conductor and neutral conductor, therefore no leading edge or trailing edge phase control. Operation without a neutral conductor: Switching of light bulbs, HV halogen lamps, electronic or inductive transformers with halogen or LED lamps, dimmable HV LED lamps or compact fluorescent lamps. Device is powered via the the phase conductor and therefore works according to the leading edge or trailing edge principle. Automatic or manual setting of dimming principle according to load (leading or trailing edge). Display of the selected operating mode using LED. Combination with RF operating top unit, 1-gang 2-gang for KNX: Switching actuator channel, 1-gang or heating actuator, 1-gang. Sensor channel, 1-gang or 2-gang. Local control of System 3000 insert possible. Wireless control of other devices for KNX as sensor possible. Temperature detection Insert function selection for switching: NO NC operation, staircase function with switch-off pre-warning, scene function (16 scenes), blocking function, time delays. Auxiliary input can be used as an additional operating point for the System 3000 insert or for wireless control of other devices for KNX as a sensor. Insert function selection for room temperature controller: Control of 230 V servos, heating mode, cooling mode, heating and cooling mode, switchover to heating or cooling mode via communication object or auxiliary input. PWM and 2-point controller, absolute and relative setpoint setting, heating requirement control incl. cascading, valve protection function. Cyclical monitoring of the floor temperature, service mode for valve output, frost protection function (automatic or via communication object), temperature sensor calibration, boost function, summer and winter compensation, scene function (16 scenes). Auxiliary input can be used as an additional operating point for the System 3000 insert or for wireless control of other devices for KNX as a sensor. Alternatively, the auxiliary input can be parameterised for switching between heating and cooling mode. Notes : For operation without a neutral conductor, the minimum load for light bulbs, HV halogen lamps, Tronic transformers, and wound transformers increases to 50 W. If the ambient temperature is higher than 25 C, the connected load must be reduced.