Registreeru, et avada oma eksklusiivsed B2B hinnad ja alustada ostlemist. Registreeru kohe!
Powerline sensor inputs, 8 channels, internal low voltage image 1
ELTAKO

Powerline sensor inputs, 8 channels, internal low voltage

Laos: Ei Hankija laovaru: Ei Minimaalne tellimuse kogus: 1
Hind (ilma KM-ta):
94,43 €
Hind kehtib kuni 31.12.24
EAN: 4010312316719
MPN: 31800001
Pakend: 1

Technical Information

Toote seisukord Uus
Tootja nimi Powerline sensor inputs, 8 channels, internal low voltage
Bränd ELTAKO
Kategooriad Andurid
Päritoluriik CN
Harmoneeritud süsteemi kood 8526 9200 00
Paigaldusviis Süvistatud paigaldus (krohvi)
Mudel Muul viisil
Sisendite arv 8
Siinisüsteem KNX No
Raadiosageduslik siinisüsteem No
Siinisüsteem Powernet Yes
Muud siinisüsteemid Puudub
Siinisüsteem LON No
Siinisüsteem KNX radio No

Pakendamise üksikasjad

Pakkimistase 1 4010312316719, 4010312316719
Pakkimistase 2 4010312316719
Pakkimistase 3 4010312316719

Allalaadimised

Toote lehe süvalink

Kirjeldus

Powerline sensor input with 8 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at different places. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above them is a slide switch which functions as a configuration switch. Position 0: 2 adjacent inputs as direction pushbuttons for UP/DOWN or ON/OFF. Position 1: All sensor inputs function separately as NO contacts. Position 2: All sensor inputs function separately as pushbuttons. This setting always affects all 8 inputs. The setting can only be changed after a reset. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². The addresses of the 8 inputs can also be freely assigned if necessary using the PC software SIENNA-Professional. The socket strip located above this has 9 plug-in wires with wire end-sleeves. 8 control inputs with internal low voltage.