Reģistrējieties, lai atbloķētu savas ekskluzīvās B2B cenas un sāktu iepirkties. Reģistrējieties tagad!
Powerline sensor inputs, 8 channels, internal low voltage image 1
ELTAKO

Powerline sensor inputs, 8 channels, internal low voltage

Ir noliktavā: Nē Piegādātāja krājumi: Nē Minimālais pasūtījuma daudzums: 1
Cena (bez PVN):
94,43 €
Šī cena ir spēkā līdz 31.12.24
EAN: 4010312316719
MPN: 31800001
Iepakojums: 1

Technical Information

Preces stāvoklis Jauns
Ražotāja nosaukums Powerline sensor inputs, 8 channels, internal low voltage
Zīmols ELTAKO
Kategorijas Sensori
Izcelsmes valsts CN
Harmonizētās sistēmas kods 8526 9200 00
Montāžas metode Iebūvējams vienā līmenī (apmetums)
Modelis Citi
Ievadu skaits 8
Autobusu sistēma KNX No
Autobusu sistēmas radio bieži No
Autobusu sistēma Powernet Yes
Citas autobusu sistēmas Nav
Autobusu sistēma LON No
Autobusu sistēma KNX radio No

Iepakojuma informācija

Iepakojuma līmenis 1 4010312316719, 4010312316719
Iepakojuma līmenis 2 4010312316719
Iepakojuma līmenis 3 4010312316719

Lejupielādes

Links uz ražotāju mājaslapu

Apraksts

Powerline sensor input with 8 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at different places. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above them is a slide switch which functions as a configuration switch. Position 0: 2 adjacent inputs as direction pushbuttons for UP/DOWN or ON/OFF. Position 1: All sensor inputs function separately as NO contacts. Position 2: All sensor inputs function separately as pushbuttons. This setting always affects all 8 inputs. The setting can only be changed after a reset. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². The addresses of the 8 inputs can also be freely assigned if necessary using the PC software SIENNA-Professional. The socket strip located above this has 9 plug-in wires with wire end-sleeves. 8 control inputs with internal low voltage.