Register to Unlock Your Exclusive B2B Prices. Register now
Powerline sensor inputs, 8 channels, internal low voltage
Цена на складе (без НДС):
94,43 €
Цена действительна до 31.12.24
Цена за м:
94,43 €
EAN: 4010312316719
MPN: 31800001
Наш склад:
Нет
Запасы поставщика:
Нет
За упаковку:
1
За коробку:
1
За поддон:
N/A
Технические данные
| Состояние товара | Новый |
| Название производителя | Powerline sensor inputs, 8 channels, internal low voltage |
| Бренд | ELTAKO |
| Категории |
Датчики |
| Страна происхождения | CN |
| Код гармонизированной системы | 8526 9200 00 |
| Способ крепления | Монтаж заподлицо (штукатурка) |
| Модель | Другое |
| Количество входов | 8 |
| Шинная система KNX | No |
| Шинная система радио частая | No |
| Шинная система Powernet | Yes |
| Другие автобусные системы | Нет |
| Шинная система LON | No |
| Шинная система Радио KNX | No |
Сведения об упаковке
| Уровень упаковки 1 | 4010312316719, 4010312316719 |
| Уровень упаковки 2 | 4010312316719 |
| Уровень упаковки 3 | 4010312316719 |
Downloads
Описание
Powerline sensor input with 8 channels. 53x43mm, 25mm deep for mounting in 58mm switch boxes. 8 sensor inputs with internal low voltage. Standby loss only 0,5 watt. To control and switch at different places. Use only potential free switching elements. Internal low voltage applied to the sensor inputs. Two rotary switches are located on the front for address assignment: The left rotary switch defines the group address g with 16 alphabetical values from A to P. The right rotary switch defines the element address e with 16 numerical values from 0 to 15. Above them is a slide switch which functions as a configuration switch. Position 0: 2 adjacent inputs as direction pushbuttons for UP/DOWN or ON/OFF. Position 1: All sensor inputs function separately as NO contacts. Position 2: All sensor inputs function separately as pushbuttons. This setting always affects all 8 inputs. The setting can only be changed after a reset. To the left of the rotary switches is a red LED which indicates all activities. Next to it is a reset pushbutton and to the right of that is a service pin. For functions, please refer to the operating instructions. The terminals located above are plug-in terminals for conductor cross-sections of 0.2mm² to 1.5mm². The addresses of the 8 inputs can also be freely assigned if necessary using the PC software SIENNA-Professional. The socket strip located above this has 9 plug-in wires with wire end-sleeves. 8 control inputs with internal low voltage.