RS485 bus energy meter data gateway

Prekės būklė	Nauja
Gamintojo pavadinimas	RS485 bus energy meter data gateway
Prekės ženklas	ELTAKO
Kategorijos	Jutikliai
Kilmės šalis	CN
Suderintos sistemos kodas	8526 9200 00
Montavimo metodas	DRA
Modelis	Projektinė gamintojo radijo sąsaja
Įtampos tipas	Nuolatinė srovė
Energijos sunaudojimas	0.4 W
EIB / KNX magistralės sistema	No
Magistralės sistemos radijo dažnis	Yes
„Powernet“ magistralės sistema	No
Modulinių tarpų skaičius plotyje	1
Kitos maršrutinės sistemos	Kita
LON magistralinė sistema	No
Išmontavimo apsauga	No
Radijo bangų sąsaja	No
IR sąsaja	Yes
Protokolas	Kita
Priklausomas nuo tiekėjo	No
Nedatuojamas	No
Vizualizacija	No
Interneto serveris	No
Darbinė įtampa (diapazonas)	12 V
Saugos laipsnis (IP)	IP20
Su LED rodmeniu	No
KNX radijo magistralės sistema	No
Dvikryptis radijas	Yes

Pakavimo lygis 1	4010312316146, 4010312316146
Pakavimo lygis 2	4010312316146
Pakavimo lygis 3	4010312316146

Wireless energy meter data gateway for meters equipped with an IEC 62056-21 IR interface. 2 channels. Only 0.4 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This energy meter data gateway can provide the data of an electronic domestic supply meter (eHZ-EDL) with IR interface according to IEC 62056-21 and SML protocol version 1 to the RS485 bus. Either for forwarding to an external computer or a Professional Smart Home controller. Regular flashing of the green LED indicates that the FSDG14 is receiving data from the meter. Active power, up to 4 meter readings and the serial number are transferred. The serial number corresponds to the last 4 bytes (hex) of the server ID printed on the meter. The telegram is sent over the wireless building service by means of the wireless antenna module FAM14. Usage data are transmitted over channel 1 and delivery data over channel 2. It is therefore essential for the FAM14 to issue a device address. If there is a change in active power or a meter reading, the appropriate telegram is sent immediately and all telegrams including the serial number are sent cyclically every 10 minutes. The PCT14 PC tool can also read out the FSDG14. Turn the rotary switch to select the following operating modes (OBIS codes according to IEC 62056-61): 1: Usage meter (1.8.0) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 2: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. 3: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 4: Usage meter (1.8.0) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. The link is made by using an AIR IR scanner. The scanner is attached by its fixing magnets to the IR output of the meter and is connected by its connecting cable to terminals Rx, GND and +12 V.