RS485 bus energy meter data gateway

Состояние товара	Новый
Название производителя	RS485 bus energy meter data gateway
Бренд	ELTAKO
Категории	Датчики
Страна происхождения	CN
Код гармонизированной системы	8526 9200 00
Способ крепления	DRA (адаптер для установки на DIN-рейку)
Модель	Радиоинтерфейс в зависимости от производителя
Тип напряжения	DC
Потребляемая мощность	0.4 W
Шинная система KNX	No
Шинная система радио частая	Yes
Шинная система Powernet	No
Ширина в количестве модульных интервалов	1
Другие автобусные системы	Другое
Шинная система LON	No
Защита от демонтажа	No
Радиоинтерфейс	No
ИК-интерфейс	Yes
Протокол	Другое
Зависит от провайдера	No
Обновляемый	No
Визуализация	No
Веб сервер	No
Рабочее напряжение	12 V
Степень защиты (IP)	IP20
со светодиодной индикацией	No
Шинная система Радио KNX	No
Радио частый двунаправленный	Yes

Уровень упаковки 1	4010312316146, 4010312316146
Уровень упаковки 2	4010312316146
Уровень упаковки 3	4010312316146

Wireless energy meter data gateway for meters equipped with an IEC 62056-21 IR interface. 2 channels. Only 0.4 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This energy meter data gateway can provide the data of an electronic domestic supply meter (eHZ-EDL) with IR interface according to IEC 62056-21 and SML protocol version 1 to the RS485 bus. Either for forwarding to an external computer or a Professional Smart Home controller. Regular flashing of the green LED indicates that the FSDG14 is receiving data from the meter. Active power, up to 4 meter readings and the serial number are transferred. The serial number corresponds to the last 4 bytes (hex) of the server ID printed on the meter. The telegram is sent over the wireless building service by means of the wireless antenna module FAM14. Usage data are transmitted over channel 1 and delivery data over channel 2. It is therefore essential for the FAM14 to issue a device address. If there is a change in active power or a meter reading, the appropriate telegram is sent immediately and all telegrams including the serial number are sent cyclically every 10 minutes. The PCT14 PC tool can also read out the FSDG14. Turn the rotary switch to select the following operating modes (OBIS codes according to IEC 62056-61): 1: Usage meter (1.8.0) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 2: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. 3: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 4: Usage meter (1.8.0) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. The link is made by using an AIR IR scanner. The scanner is attached by its fixing magnets to the IR output of the meter and is connected by its connecting cable to terminals Rx, GND and +12 V.