RS485 bus energy meter data gateway

Preces stāvoklis	Jauns
Ražotāja nosaukums	RS485 bus energy meter data gateway
Zīmols	ELTAKO
Kategorijas	Sensori
Izcelsmes valsts	CN
Harmonizētās sistēmas kods	8526 9200 00
Montāžas metode	DRA (adapteris uz DIN sliedes)
Modelis	Radio interfeiss, kas paredzēts konkrētajam ražotājam
Sprieguma veids	DC
Elektrības patēriņš	0.4 W
Autobusu sistēma KNX	No
Autobusu sistēmas radio bieži	Yes
Autobusu sistēma Powernet	No
Platums moduļu atstarpju skaitā	1
Citas autobusu sistēmas	Citi
Autobusu sistēma LON	No
Demontāžas aizsardzība	No
Radio interfeiss	No
IR interfeiss	Yes
Protokols	Citi
Atkarīgs no pakalpojumu sniedzēja	No
Atjaunināms	No
Vizualizācija	No
Web serveris	No
Darba spriegums	12 V
Aizsardzības pakāpe (IP)	IP20
Ar LED indikāciju	No
Autobusu sistēma KNX radio	No
Radio bieži divvirzienu	Yes

Iepakojuma līmenis 1	4010312316146, 4010312316146
Iepakojuma līmenis 2	4010312316146
Iepakojuma līmenis 3	4010312316146

Wireless energy meter data gateway for meters equipped with an IEC 62056-21 IR interface. 2 channels. Only 0.4 watt standby loss. Modular device for DIN-EN 60715 TH35 rail mounting. 1 module = 18mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. This energy meter data gateway can provide the data of an electronic domestic supply meter (eHZ-EDL) with IR interface according to IEC 62056-21 and SML protocol version 1 to the RS485 bus. Either for forwarding to an external computer or a Professional Smart Home controller. Regular flashing of the green LED indicates that the FSDG14 is receiving data from the meter. Active power, up to 4 meter readings and the serial number are transferred. The serial number corresponds to the last 4 bytes (hex) of the server ID printed on the meter. The telegram is sent over the wireless building service by means of the wireless antenna module FAM14. Usage data are transmitted over channel 1 and delivery data over channel 2. It is therefore essential for the FAM14 to issue a device address. If there is a change in active power or a meter reading, the appropriate telegram is sent immediately and all telegrams including the serial number are sent cyclically every 10 minutes. The PCT14 PC tool can also read out the FSDG14. Turn the rotary switch to select the following operating modes (OBIS codes according to IEC 62056-61): 1: Usage meter (1.8.0) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 2: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. 3: Usage tariff 1 (1.8.1) and tariff 2 (1.8.2) and usage power on channel 1, delivery meter (2.8.0) and delivery power on Channel 2. 4: Usage meter (1.8.0) and usage power on channel 1, delivery tariff 1 (2.8.1) and tariff 2 (2.8.2) and delivery power on channel 2. The link is made by using an AIR IR scanner. The scanner is attached by its fixing magnets to the IR output of the meter and is connected by its connecting cable to terminals Rx, GND and +12 V.