Register to unlock your exclusive B2B prices. Register now
RS485 bus wireless actuator PWM dimmer switch for LED
Цена на складе (без НДС):
90,58 €
Цена действительна до 2024-12-31
Цена за м:
90,58 €
EAN: 4010312324097
MPN: 30014068
Наш склад:
Нет
Запасы поставщика:
Нет
За упаковку:
1
За коробку:
1
За поддон:
N/A
Технические данные
| Состояние товара | Новый |
| Название производителя | RS485 bus wireless actuator PWM dimmer switch for LED |
| Бренд | ELTAKO |
| Категории |
Датчики |
| Страна происхождения | CN |
| Код гармонизированной системы | 8526 9200 00 |
| Способ крепления | DRA (адаптер для установки на DIN-рейку) |
| Модель | Привод регулировки яркости |
| Количество выходов | 4 |
| Шинная система KNX | No |
| Шинная система радио частая | Yes |
| Шинная система Powernet | No |
| С автобусным сообщением | No |
| Тип нагрузки | Емкостной |
| Напряжение | 12-24 V |
| Ширина в количестве модульных интервалов | 2 |
| Другие автобусные системы | Нет |
| Шинная система LON | No |
| Вход подстанции | No |
| Возможно параллельное обслуживание | No |
| Локальное управление/ручное управление | Yes |
| Выходная мощность | 96 W |
| Степень защиты (IP) | IP20 |
| со светодиодной индикацией | Yes |
| Повышение мощности подходит | No |
| Шинная система Радио KNX | No |
| Радио частый двунаправленный | Yes |
| Модуль шины съемный | Yes |
| Макс. светодиодный индикатор питания | 96 W |
Сведения об упаковке
| Уровень упаковки 1 | 4010312324097, 4010312324097 |
| Уровень упаковки 2 | 4010312324097 |
Downloads
Описание
PWM dimmer switch with 4 channels for LED 12-24V DC, each up to 4A. Adjustable minimum brightness and dimming speed. With snooze function and light alarm circuit. Additionally with light scene control via Professional Smart Home controller or with wireless pushbuttons. Standby loss only 0.1 watt. Modular device for DIN-EN 60715 TH35 rail mounting. 2 modules = 36mm wide, 58mm deep. Connection to the Eltako-RS485 bus. Bus cross wiring and power supply with jumper. The set brightness level remains stored when switched off (memory). In case of a power failure, the switch position and brightness level are saved and switched on when the power supply is restored. Automatic electronic overload protection and overtemperature shutdown. The upper rotary switch is only required for teach-in. Use the middle % lamp rotary switch to set the minimum brightness (fully dimmed). Use the lower dimming speed rotary switch to set the dimming speed. The pushbuttons can either be taught in as direction pushbuttons or universal pushbuttons: as direction pushbutton, one side is switch on and dim up. the other side is switch off and dim down. Double-click on the switch-on side to trigger automatic dim up to full brightness at dimming speed. Double-click on the switch-off side to trigger the snooze function. As universal pushbutton, change the direction by briefly releasing the pushbutton. FHB wireless motion/brightness sensors can be taught in as master or slave. FAH wireless brightness sensors can be taught in for switch-off dependent on brightness or as a twilight switch. Light scene control, light alarm circuit and snooze function as described in the operating instructions. The LED accompanies the teach-in process as described in the operating instructions and indicates control commands by briefly flickering during operation.