Technical Information
Состояние товара |
Новый |
Название производителя |
Bus pushbutton coupler for 8 conventional pushbuttons |
Бренд |
ELTAKO
|
Категории |
Датчики
|
Страна происхождения |
CN |
Код гармонизированной системы |
8526 9200 00
|
Способ крепления |
Монтаж заподлицо (штукатурка) |
Шинная система KNX |
No |
Шинная система радио частая |
Yes |
Шинная система Powernet |
No |
Тип крепления |
Крепление на зажимах |
Другие автобусные системы |
Другое |
Шинная система LON |
No |
Степень защиты (IP) |
IP20 |
Количество точек срабатывания |
1 |
Шинная система Радио KNX |
No |
Радио частый двунаправленный |
Yes |
Мин. глубина встроенной монтажной коробки |
18 mm |
Сведения об упаковке
Уровень упаковки 1 |
4010312326015, 4010312326015 |
Уровень упаковки 2 |
4010312326015 |
Уровень упаковки 3 |
4010312326015 |
Загрузки
Описание
Bus pushbutton coupler FTS61BTK/8 for 8 conventional pushbuttons for connection to FTS14TG pushbutton gateways by 2-wire pushbutton bus. Only 0.2 watt standby loss. For installation. 45mm long, 45mm wide, 18mm deep. Up to 30 bus pushbuttons and/or bus pushbutton couplers FTS61BTK/8 devices can be connected to the BP and BN terminals of a pushbutton gateway FTS14TG. The permitted total line length is 200m. The RLC device enclosed with the FTS14TG must also be connected to the terminals BP and BN on the bus switch or pushbutton bus coupler furthest away. A voltage of 29V DC is supplied to the connected FTS61BTK/8 over a 2-wire pushbutton bus which is also used for data transfer. Please use only conventional bus or telephone lines. Up to four conventional pushbuttons T1-T4 can be connected to the 15cm long connecting cables. Each opposite pole is T0. The connecting cables can be extended up to 2m. Caution: Do not apply any voltage. The pairs T1/T3, T2/T4, T5/T7 and T6/T8 can be defined as direction pushbuttons. Connect the bus to BP and BN. Make sure the polarity is correct.