Gira G1 24 V Gira G1 black gl.

Gira G1 24 V black glass The Gira G1 is a multi-functional room operating device for visualising and operating a variety of building functions. For use in the KNX system and Gira door communication system, or as client. The respective range of functions depends on the firmware used. For details on the exact scope of functions, please refer to the Gira online catalogue and the device’s technical documentation. Features: Operation is via a gesture-capable multi-touch display. Connection and communication are via LAN or WLAN, depending on the variant. Integrated speaker. Integrated microphone with echo compensation. Potential applications and combinations: As a multi-functional room operating device, the Gira G1 offers the following functions and function combinations: KNX room operating device Video home station Client for the following systems servers - Gira HomeServer - eNet - X1 Alarm Connect security system Integration of Internet services Properties as a KNX room operating device: Intuitive user interface that can be adapted by the end user. Switching and dimming (relative and absolute), dimming (incl. Dimming RGB, RGBW, and Tunable White), blind and roller shutter control, value transmitter, and scene auxiliary unit. Status display, display of date and time, display of indoor and outdoor temperature. Up to 150 functions (six function folders or rooms with up to 25 functions each). Up to 125 seven-day timer with 10 switching times each. Room temperature controller in combination with the temperature sensor module (available as an optional extra), or KNX devices for room temperature measurement, e.g. touch sensor 3 Komfort. Operating modes: Comfort, standby, night, and frost or heat protection with their own temperature setpoint values (for heating and or cooling). Operating modes can be adapted individually. A heating clock as seven-day timer with 28 switching times. Room temperature controller auxiliary unit for controlling air conditioning systems (fan coil) in conjunction with a KNX gateway for air conditioning systems. Supports KNX Data Secure and KNX IP Secure. Properties as video home station: Camera changeover: specific selection of connected colour cameras. Control of the door opener. Switching the ringtone on and off. Ring tone can be selected from a choice of 10 melodies. Properties as a home station with SIP client: Client function for SIP external systems from e.g. Comelit, TCS, SCHÜCO DCS Touch, 2N. Direct SIP calls or via registrar possible 64 internal calls possible, e. g. to the concierge Early media support for video image Integration of Internet services: Gira weather service: display of the weather forecast for up to five cities (internet connection required). Gira G1 can also be used as a client for the following systems servers (requires firmware update):: HomeServer client eNet Client X1 client Alarm Connect security system When used as a client, the KNX room operating device features are not available. For details on the exact scope of functions, please refer to the Gira online catalogue and the device's technical documentation. Gira G1 with flush-mounted connection module 24 V WLAN for connecting to a suitable cable (e.g. to the second wire pair of the KNX bus line). Data communication via WLAN. Notes : Suitable for indoor use only. Recommended mounting height: 150 cm above floor. Installation is performed on a deep device box (an electronics box is recommended for a LAN connection). Communication with the KNX installation is exclusively via the KNXnet IP standard. An IP router for KNX must be used to connect the Gira G1 PoE to the KNX installation. Several Gira G1 units can be operated on one IP router for KNX. In order to ensure reliable communication via WLAN, a Gira IP router for KNX (firmware version 3 and later) is required to connect the Gira G1 230 V or G1 24 V to the KNX installation. For this purpose the Gira IP router for KNX (firmware version 3 and later) is specially equipped with the additional function "Reliable data communication". Several Gira G1 units can be operated on one Gira IP router for KNX (firmware version 3 and later). Commissioning in the KNX system from ETS 5.5 or higher. Can be used as a home station in connection with the DCS-IP gateway. When planning the system, please observe the technical information on network planning in the device documentation. The Gira Project Assistant (GPA) is required for firmware updates. The GPA is available free of charge in the Gira download area. Using the timers requires either an internet connection to a NTP time server or a KNX clock (e.g. Gira weather station Plus 2074 00). The use of an electronics box is recommended to install the flush-mounted connection module PoE. A commercially available PoE-enabled switch or router or a PoE injector is required. For dimensioning the power supply, the total power consumption of all connected devices as well as the voltage drop in the supply network must always be considered.