Recessed luminaires Arimo Fit C Prisms White ETDD 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8177151

Состояние товара	Новый
Название производителя	Recessed luminaires Arimo Fit C Prisms White ETDD 31W 4200lm Wide reduced glare UGR19 (W19) IK03 3 SDCM 8177151
Бренд	TRILUX
Категории	Настенные и потолочные светильники
Страна происхождения	DE
Цвет корпуса	Другое
Индекс цветопередачи CRI	20-39
Тип лампы	Другое
Сила удара	IK00
Степень защиты (IP)	Другое
Угол луча	Открытый луч/диффузный

Уровень упаковки 1	4018242675098, 4018242675098
Уровень упаковки 2	4018242675098

Класс защиты	Нет
Подставка для лампы	Другое
Тип соединения	Другое
Тип напряжения	AC
Тип сетки	Другое
Тип механизма управления	Электронный трансформатор
Материал корпуса	Другое
Выход света	Прямой
Совместное использование света	Асимметричный
Материал покрытия	Другое
Цвет света	Другое
Тип проводки	Подходит для сквозной проводки
Консистенция цвета (эллипс МакАдама)	SDCM1
Фотобиологическая безопасность согласно EN 62471	Другое
Степень защиты (NEMA)	Другое
Испытание накала согласно IEC 60695-2-11	Нет
Распределитель света	Другое
Класс энергоэффективности встроенного светильника	Другое
Класс энергоэффективности предоставляемого сменного встроенного светильника	A
Самый высокий класс энергоэффективности сменной лампы	A
Самый низкий класс энергоэффективности сменной лампы	A
Цветовая температура регулируется	Нет
Световой поток регулируемый	Нет
Угол луча регулируемый	Нет
Корпус для защиты поверхности	Другое

Square recessed LED luminaire with microprismatic cover PW. Version M84 (625 mm x 625 mm). Optionally, the luminaire can be equipped with an emergency light system for ceiling recessing with an emergency light operation time of 3 hours. In emergency light operation, the luminaire luminous flux is 575 lm. Generation of an enhanced depth effect in the room. For system ceilings with exposed grids. The luminaire body is flush with the ceiling system on the room side. In combination with accessories to be ordered separately, suitable for plasterboard ceiling openings and for flush ceiling surface mounting. The Sky frame, optionally available as an accessory, creates a room-atmospheric depth effect in the classic, flat modular ceiling; the 3-dimensional contour of a skylight is reproduced. The optical system consists of a highly efficient PMMA cover with microprisms. The microstructured PMMA prism surface of the optical system has a glare-reducing effect, is non-yellowing and does not cloud. With symmetric limited wide light distribution. Glare evaluation according to UGR rating (EN 12464-1) < 19. Suitable for VDU workstations according to EN 12464-1 via limited luminance L ≤ 3000 cd/2 for beam angle above 65° all-round. Harmonious light effect due to homogeneously illuminated light emission. Individual design of the light emission surface (e.g. with printing) and other special solutions are possible on request. Luminaire luminous flux and light color fixed. Luminaire luminous flux 4200 lm, connected load 31 W, maximum luminous efficiency of luminaire 135 lm/W. Light colour neutral white, correlated colour temperature (CCT) 4000 K, general colour rendering index (CRI) Ra > 80. Colour locus tolerance (initial MacAdam) ≤ 3 SDCM. Mean rated service life L80(tq 25 °C) = 100,000 h, mean rated service life L90(tq 25 °C) = 50,000 h. The light source is replaceable according to the ecodesign requirements (VO (EU) 2019/2020). Luminaire body of extruded aluminium profile. Surface coated white (RAL 9016). Luminaire dimensions (L x W x H): 620 mm, 620 mm, 22 mm. The all-round edge of the frame profile assists mounting. The luminaire frame is profiled in a 3-dimensional way to generate a depth effect on the ceiling. Luminaire can be covered with insulatin material at ta 25°C, ta35 °C without insulation materila can be also be used. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, Protection rating on room side: IP40, impact resistance level in accordance with IEC 62262: IK03, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. Weight: 3,5 kg. Polarity-protected rapid connection with mains through-wiring up to Ø 2.5 mm2. Connection of the ballast unit to the luminaire (Plug ‘N Play). The luminaire’s packaging concept facilitates separate removal of the control gear unit for pre-assembly, leaving the remaining luminaire components protected until final assembly. With external operating device, digitally dimmable (DALI). Control gear unit according to DALI-2 standard (EN 62386). Luminaire is switchable and dimmable by means of touch functionality via DALI control terminals (Touch DIM). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). Control gear unit is open-circuit proof and protected against faulty connection, short circuit, overload and overtemperature. Output ripple of the control gear unit ≤ 4 % for effective control of the LED system and for flicker-free light. The ENEC certification by an independent testing laboratory is in preparation. The luminaire can be equipped with the Monitoring Ready (MOR) functionality on request. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation and bears the CE symbol. The luminaire is part of a range of recessed, surface-mounted and suspended luminaires with a harmonised appearance. The application variety of the product series is underlined by variants regarding luminous flux packages, light distribution curves and protection ratings. On request, the basic range can be expanded with project-specific luminaire features. Luminaire available for 10 years, spare parts (LED module, control gear unit, optical system) for 15 years from date of invoice, subject to reasonable modifications in the interests of progress.