Technical Information
Состояние товара |
Новый |
Название производителя |
Current-limiting relay capacitive, 1 NO contact 16A |
Бренд |
ELTAKO
|
Категории |
Аксессуары (Автоматика и управление)
|
Страна происхождения |
CN |
Код гармонизированной системы |
8536 4900 00
|
Способ крепления |
Другое |
Номинальный постоянный ток Iu |
16 A |
Ограничитель тока короткого замыкания |
No |
Макс. полная мощность |
600 VA |
Сведения об упаковке
Уровень упаковки 1 |
4010312205464, 4010312205464 |
Уровень упаковки 2 |
4010312205464 |
Уровень упаковки 3 |
4010312205464 |
Загрузки
Описание
1 NO contact 10A/250V AC. No standby loss. Built-in device for installation. 45mm long, 45mm wide, 18mm deep. Max. capacitive load 120μF downstream of rectifier (e.g. energy saving lamps and electronic ballast) or 60μF directly at the mains (e.g. shunt-compensated fluorescent lamps). Limiting resistor 24Ω, limiting period approx. 15ms. The starting current impulse of energy saving lamps, fluorescent lamps and compact fluorescent lamps is limited to 10A by short-time switch on (approx. 15ms) of heavy-duty resistors (24Ω). The current-limiting relay is connected on the load side of the protected relay contact. Permanent load max. 600W, max. switching frequency 600/h. Explanation of capacitive load specification: The specified max. capacitive load directly at the mains is the deciding factor determining shunt-compensated fluorescent lamps or conventional ballast, for example. Here the capacitor switched in parallel to the mains is the deciding factor determining the correct dimensioning per lamp. The specified max. capacitive load downstream of the rectifier is the deciding factor determining fluorescent lamp ballast or energy saving lamps, for example. An equivalent capacitance of 10µF per lamp may be calculated.