Зарегистрируйтесь, чтобы разблокировать ваши эксклюзивные B2B цены и начать покупки. Зарегистрируйтесь сейчас!
Similar figure image 1
Siemens

Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0....

В наличии: Нет Запасы поставщика: Нет Минимальное количество заказа: 1
Цена (без НДС):
188,43 € за шт.
Цена действительна до 24.12.24
EAN: 0662643408447
MPN: 6FX5002-2CA12-1CF0
Упаковка: 1

Technical Information

Состояние товара Новый
Название производителя Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0....
Бренд Siemens
Категории Датчики
Страна происхождения SK
Код гармонизированной системы 8544 4290 00
Без галогена -
Номинальное напряжение UN V
Длина кабеля UN m
Проверено -
Количество полюсов UN
Допустимая внешняя температура кабеля при монтаже/погрузочно-разгрузочных работах UN °C
Допустимая наружная температура кабеля после монтажа без вибрации UN °C
Резистор непрерывности UN mOhm
Вулканизировать -
со светодиодной индикацией -
Номинальный ток In UN A

Сведения об упаковке

Уровень упаковки 1 0662643408447

Описание

Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0.34+4x 0.5 C without sub-D connector UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.3 mm Length (m)= MOTION-CONNECT 500 Cables for industrial use, predominantly with fixed cable installation. MOTION-CONNECT cables are suitable for use with a wide range of processing and production machines. They are available as ready-to-connect power and signal cables or are sold by the meter. MOTION-CONNECT 500 represents a cost-effective solution for predominantly fixed cable installation or for applications where the cables are subject to low mechanical stress. The cables have been tested for traversing distances of up to 5 meters. MOTION-CONNECT stands for high quality and system responsibility based on seamless quality management and system-tested original components. The prefabricated cables with IP67 connectors in a metal house and the optional SPEED-CONNECT locking system set themselves apart as a result of their high degree of ruggedness and user friendliness. MOTION-CONNECT 500 cables can be used to address applications requiring a medium dynamic performance. Further, they have UL/CSA certification and comply with RoHS directives. The power cables are equipped with SPEED-CONNECT connectors or full-thread connectors – and are available as basis cables and extension cables (optionally with and without additional brake conductors). Power cables are also available for motors equipped with terminal box. A wide range of signal cables are also available to address various applications (for example, DRIVE-CLIQ as well as third-party systems). MOTION-CONNECT - system responsibility for motion control applications.