Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0....

Цена на складе (без НДС):

207,36 €

Цена действительна до 2024-12-31

Цена за шт.: 207,36 €

EAN: 0662643511239

MPN: 6FX5002-2CA12-1CA0

Наш склад: Нет Запасы поставщика: Нет

За упаковку: 1 За коробку: N/A

Технические данные

Состояние товара	Новый
Название производителя	Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0....
Бренд	Siemens
Категории	Датчики
Страна происхождения	SK
Код гармонизированной системы	8544 4290 00
Без галогена	-
Номинальное напряжение	UN V
Длина кабеля	UN m
Проверено	-
Количество полюсов	UN
Допустимая внешняя температура кабеля при монтаже/погрузочно-разгрузочных работах	UN °C
Допустимая наружная температура кабеля после монтажа без вибрации	UN °C
Резистор непрерывности	UN mOhm
Вулканизировать	-
со светодиодной индикацией	-
Номинальный ток In	UN A

Сведения об упаковке

Уровень упаковки 1

0662643511239

Описание

Signal cable pre-assembled type: 6FX5002-2CA12 (HTL and TTL encoder) 4x 2x 0.34+4x 0.5 C without sub-D connector UL/CSA, DESINA MOTION-CONNECT 500 Dmax=9.3 mm Length (m)= MOTION-CONNECT 500 Cables for industrial use, predominantly with fixed cable installation. MOTION-CONNECT cables are suitable for use with a wide range of processing and production machines. They are available as ready-to-connect power and signal cables or are sold by the meter. MOTION-CONNECT 500 represents a cost-effective solution for predominantly fixed cable installation or for applications where the cables are subject to low mechanical stress. The cables have been tested for traversing distances of up to 5 meters. MOTION-CONNECT stands for high quality and system responsibility based on seamless quality management and system-tested original components. The prefabricated cables with IP67 connectors in a metal house and the optional SPEED-CONNECT locking system set themselves apart as a result of their high degree of ruggedness and user friendliness. MOTION-CONNECT 500 cables can be used to address applications requiring a medium dynamic performance. Further, they have UL/CSA certification and comply with RoHS directives. The power cables are equipped with SPEED-CONNECT connectors or full-thread connectors – and are available as basis cables and extension cables (optionally with and without additional brake conductors). Power cables are also available for motors equipped with terminal box. A wide range of signal cables are also available to address various applications (for example, DRIVE-CLIQ as well as third-party systems). MOTION-CONNECT - system responsibility for motion control applications.