Pradžia
ELTAKO
1- and 2-level outdoor wireless repeater

1- and 2-level outdoor wireless repeater

Sandėlyje esančios prekės kaina (be PVM):

69,21 €

Ši kaina galioja iki 2024-12-31

Kaina už m: 69,21 €

EAN: 4010312310137

MPN: 30000353

Mūsų sandėlis: Ne Pardavėjo atsargos: Ne

Už pakuotę: 1 Už dėžę: 1 Už padėklą: N/A

Techniniai duomenys

Prekės būklė	Nauja
Gamintojo pavadinimas	1- and 2-level outdoor wireless repeater
Prekės ženklas	ELTAKO
Kategorijos	Jutikliai
Kilmės šalis	CN
Suderintos sistemos kodas	8526 9200 00
Nominali įtampa	230 V
Montavimo metodas	Viršutinis sluoksnis (tinko)
EIB / KNX magistralės sistema	No
Magistralės sistemos radijo dažnis	Yes
„Powernet“ magistralės sistema	No
Kitos maršrutinės sistemos	Nėra
LON magistralinė sistema	No
Saugos laipsnis (IP)	IP54
KNX radijo magistralės sistema	No

Pakavimo informacija

Pakavimo lygis 1	4010312310137, 4010312310137
Pakavimo lygis 2	4010312310137
Pakavimo lygis 3	4010312310137

Downloads

Gilios nuorodos į produkto puslapį

Aprašymas

Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.