Avaleht
ELTAKO
1- and 2-level outdoor wireless repeater

1- and 2-level outdoor wireless repeater

Laohinnas (käibemaksuta):

69,21 €

Hind kehtib kuni 2024-12-31

Hind m kohta: 69,21 €

EAN: 4010312310137

MPN: 30000353

Meie ladu: Ei Hankija laovaru: Ei

Pakendi kohta: 1 Kasti kohta: 1 Kaubaaluse kohta: N/A

Tehnilised andmed

Toote seisukord	Uus
Bränd	ELTAKO
Kategooriad	Andurid
Päritoluriik	CN
Harmoneeritud süsteemi kood	8526 9200 00
Nimipinge	230 V
Paigaldusviis	Pinnapealne
Siinisüsteem KNX	No
Raadiosageduslik siinisüsteem	Yes
Siinisüsteem Powernet	No
Muud siinisüsteemid	Puudub
Siinisüsteem LON	No
Kaitseaste (IP)	IP54
Siinisüsteem KNX radio	No

Pakendamise üksikasjad

Pakkimistase 1	4010312310137, 4010312310137
Pakkimistase 2	4010312310137
Pakkimistase 3	4010312310137

Downloads

Toote lehe süvalink

Kirjeldus

Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.