Technical Information
Состояние товара |
Новый |
Название производителя |
1- and 2-level outdoor wireless repeater |
Бренд |
ELTAKO
|
Категории |
Датчики
|
Страна происхождения |
CN |
Код гармонизированной системы |
8526 9200 00
|
Номинальное напряжение |
230 V |
Способ крепления |
Монтаж на поверхность (штукатурка) |
Шинная система KNX |
No |
Шинная система радио частая |
Yes |
Шинная система Powernet |
No |
Другие автобусные системы |
Нет |
Шинная система LON |
No |
Степень защиты (IP) |
IP54 |
Шинная система Радио KNX |
No |
Сведения об упаковке
Уровень упаковки 1 |
4010312310137, 4010312310137 |
Уровень упаковки 2 |
4010312310137 |
Уровень упаковки 3 |
4010312310137 |
Загрузки
Описание
Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.