1- and 2-level outdoor wireless repeater

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

69,21 €

This price is valid until 31.12.24

EAN: 4010312310137

MPN: 30000353

Package: 1

Technical Information

Item condition	New
Manufacture name	1- and 2-level outdoor wireless repeater
Brand	ELTAKO
Categories	Sensors
Country of origin	CN
Harmonized System Code	8526 9200 00
Nominal voltage	230 V
Mounting method	Surface mounted (plaster)
Bus system KNX	No
Bus system radio frequent	Yes
Bus system Powernet	No
Other bus systems	None
Bus system LON	No
Degree of protection (IP)	IP54
Bus system KNX radio	No

Packing details

Packing level 1	4010312310137, 4010312310137
Packing level 2	4010312310137
Packing level 3	4010312310137

Downloads

Deep link product page

Description

Outside wireless repeater 1 and 2 levels, 60x46mm, 30mm deep. Only 0.7 watt standby loss. Supply voltage 230V. This repeater is only needed if the building conditions prevent undisturbed reception or the distance between the wireless pushbutton and receiver is too great. The 1-level mode is activated ex works. Only the signals from sensors and actuators are received, tested and retransmitted at full transmit power. Wireless signals from other repeaters are ignored to reduce the data volume. Switchover to 2-level mode is carried out by removing the cover (loosen two screws on the front panel) and repositioning the jumper flush right. In this setting, wireless signals from other 1-level repeaters are also processed. A signal may therefore be received and amplified twice. A red LED blinks briefly to indicate all the wireless signals detected. Wireless repeaters need not be taught-in. They receive and amplify signals from all wireless sensors within their reception area. On the underside there is an M12 screw for a waterproof mains connection. The protection class is IP54, the allowable ambient temperature is -20°C to +55°C. For screw mounting.