AC servo motor BSH - 1.1 N.m - 3000 rpm - keyed shaft - without brake - IP50

Vendor stock: No Minimal order quantity: 1

In stock price (excl. VAT):

755,00 €

This price is valid until 24.12.24

EAN: 3389118137219

MPN: BSH0703P11A2A

Package: 1

Pallet: 42

Technical Information

Item condition	New
Manufacture name	AC servo motor BSH - 1.1 N.m - 3000 rpm - keyed shaft - without brake - IP50
Brand	Schneider Electric
Categories	Control gear
Country of origin	DE
Model	Rotary current synchronous motor
Voltage type	AC
Rated current	0 A
Rated voltage	480 V
Number of phases	3
Construction type	Other
Number of poles	6
Rated frequency	0 Hz
Operating temperature	0-20 °C
Rated rotational speed at rated frequency	6000 1/min
Rated performance at rated frequency	0.75 kW
Degree of protection (IP)	IP50
Duty cycle	Other
Frame size according to IEC	0 mm
Full-load efficiency	0 %
Starting current ratio	0
Starting torque ratio	0
Breakdown torque ratio	0
Voltage anti-condensation heater	0 V
Output power anti-condensation heater	0 W
With positive temperature coefficient resistor (PTC)	No
With resistance temperature detector (RTD)	No
Intrinsic safety (IS)	None
Overload capability	No
Cooling method	Air
Shaft end type	Parallel key
Vacuum pressure impregnation (VPI)	Other
Suitable for frequency control	No
Bearing	Other
Insulation class according to IEC	Other
With anti-condensation	No
Nominal torque	2.4 Nm
Power factor	0

Packing details

Packing level 1	3389118137219
Packing level 2	3389118137219

Downloads

ECOP (Environmental Code of Practice) Declaration DOC CE (Declaration of conformity CE) Technical manual

Description

This product is part of the Lexium range, an offer of motion servo drives and servo motors. The 6-pole AC servo motor features a low moment of inertia with maximum mechanical speed of 8000RPM and IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder giving an angular shaft position precise to less than ±1.3 arc minutes. BSH servo motor satisfies requirements for precision and high dynamic performance, due to the low rotor inertia. It is compact, and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 4.1A and a maximum continuous power of 1.7W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP50 rated product. Its dimensions are 220mm (Length) x 70mm (Width), centring collar dimensions are 2.5mm (Depth) x 60mm (Diameter) with 82mm circle diameter of the mounting hole. It weighs 3.62kg. This product is compatible with Lexium 32, Lexium 05 and Lexium 15 servo drives. It supports international standard 70mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BSH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.