interface XLI300 Vigilohm - 220...240 V AC 50/60 Hz

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

2 124,58 €

This price is valid until 24.12.24

EAN: 3303430505167

MPN: 50516

Package: 1

Box: 2

Technical Information

Item condition	New
Manufacture name	interface XLI300 Vigilohm - 220...240 V AC 50/60 Hz
Brand	Schneider Electric
Categories	Relays
Width	76 mm
Function	For AC-current system
Height	129 mm
Depth	209.5 mm
Rated frequency	0 Hz
Line capacity	0 µF
Indication of insulation value	No
Error registration possible	No
Type of electric connection	Screw connection
Rated voltage	0 V
Rated control supply voltage at AC 50 Hz	220-240 V
Rated control supply voltage at AC 60 Hz	220-240 V
Rated control supply voltage at DC	0 V
Response value impedance 1	0 kOhm
Response value impedance 2	0 kOhm
Number of contacts as normally closed contact	0
Number of contacts as normally open contact	0
Number of contacts as change-over contact	0

Packing details

Packing level 1	3303430505167
Packing level 2	3303430505165

Downloads

Technical manual

Description

This device belongs to the Vigilohm range designed to monitor ungrounded/IT electrical networks, in accordance to installation and products standards. When two or more communicating devices (XM300C, XML308/316, XL308/316 or XD308C) are used. Or when communication with a supervisor is required, it is necessary to connect one interface to the communication bus. The interface allows communication between the Vigilohm System and a supervisor or PLC using a Modbus type protocol. It transmits the information provided by the Vigilohm System, measurement, settings, faults, alarms and identified circuit. This communication module is compatible with monitoring device XM300C, locator XL308/316, combined device XML308/316 and detector XD308C. 2 LED indicate the power status and communication. The interface is able to exclude the injection from monitoring device to avoid any perturbation inside a small network. The device can be supplied by a 220V AC to 240V AC source with a tolérence of plus 10% or minus 15%. This product is installed flush mounted, an enclosure door for example. ingress protection is IP30 when flush mounted.