KNX ARGUS 220, aluminium

In stock price (excl. VAT):

147,60 €

This price is valid until 2024-09-30

Price per m: 147,60 €

EAN: 3606485104898

MPN: MTN632569

Our warehouse: No Vendor stock: No

Per package: 1 Per box: 6 Per pallet: N/A

Technical data

Item condition	New
Manufacture name	KNX ARGUS 220, aluminium
Brand	Schneider Electric
Categories	Sensors
Country of origin	LV
Mounting method	Surface mounted (plaster)
Colour	Aluminium
Model	Movement sensor
Surface protection	Lacquered
Creep-under protection	Yes
Number of channels	20
Staircase monitoring	Yes
Material quality	Thermoplastic
Switching power	0 W
Max. transmission range frontally	16 m
Max. transmission range sideways	12 m
Bus system KNX	Yes
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	Yes
Number of digital inputs	0
Material	Plastic
Other bus systems	None
Bus system LON	No
Diameter detection range on floor	24 m
Substation input	No
RAL-number (similar)	0
Teach-function for response value luminosity	No
Operation mode switch	No
Transparent	No
Animal zone	No
Surface finishing	Matt
Detection angle horizontal	0-220 °
Min. switch-on time	1 s
Max. duty cycle	9144 min
Response value luminosity adjustable	Yes
Switch-off delay self-learning	No
Optimum mounting height	2.5 m
Bus system KNX radio	No
Radio frequent bidirectional	No
Min. depth of built-in installation box	0 mm

Packing details

Packing level 1	3606485104898
Packing level 2	3606485104896

Downloads

ECOP (Environmental Code of Practice) Instructions for use Technical manual Declaration EPD (Environmental Product Declaration) Others Declaration DOC CE (Declaration of conformity CE)

Description

KNX ARGUS 220. KNX movement detector for outdoors. 220° surface monitoring for large house fronts and sections of the house. With integrated bus coupler. The physical address is programmed with a magnet. 360° short-range zone (approx. 4 m radius). Large wiring compartment and plug system. Looping is possible. LED function display for fast alignment at the installation site. Operating elements are protected under the easily accessible cover plate. Flexibly adjustable sensor head. Possible to blank out individual lens areas. Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket. KNX software functions: Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and staircase timer can be set using the ETS or the potentiometer. Self-adjusting staircase timer. Angle of detection: 220°. Range: max. 16 m. Number of levels: 7. Number of zones: 112 with 448 switching segments. Light sensor: infinitely variable from approx. 3 - 1000 lux (infinite lux: movement detection is independent of the position of the sensor head). Time: can be set externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s to approx. 152 hours. Sensitivity: infinitely adjustable. Possible settings for sensor head: Wall mounting: 9° up, 24° down, 12° left/right, ±12° axial. Ceiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axial. Type of protection: IP 55. Contents: With cover plate and segments to limit the area of detection, screws and plugs. Colour: aluminium.