mot.det.top 2.20 m Komfort KNX Gira TX_44 anthra.

Item condition	New
Brand	Gira
Categories	Sensors
Country of origin	DE
Harmonized System Code	8536 5080 00
Mounting method	Flush mounted (plaster)
Colour	Anthracite
Model	Movement sensor
Surface protection	Other
Creep-under protection	No
Number of channels	0
Staircase monitoring	Yes
Material quality	Other
Switching power	0 W
Max. transmission range frontally	10 m
Max. transmission range sideways	6 m
Bus system KNX	Yes
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	No
Number of digital inputs	NA
Material	Other
Other bus systems	None
Bus system LON	No
Diameter detection range on floor	0 m
Substation input	No
RAL-number (similar)	0
Teach-function for response value luminosity	No
Operation mode switch	No
Transparent	No
Animal zone	No
Detection angle vertical	0-180 °
Detection angle horizontal	NA °
Min. switch-on time	0 s
Max. duty cycle	0 min
Response value luminosity adjustable	Yes
Switch-off delay self-learning	No
Optimum mounting height	2.2 m
Bus system KNX radio	No
Radio frequent bidirectional	No
Min. depth of built-in installation box	0 mm
DALI-2 certified	-

Packing level 1

4010337027188

Motion detector top unit 2.20 m Komfort for KNX Komfort anthracite Features: Installation on bus coupler 3. Configurable for motion detection (security-light application) or for room monitoring (detector application). Evaluation of brightness during active motion detection in security-light mode. Switching off lights when brightness threshold is exceeded. Configurable number of motion impulses within one monitoring time in detection mode. Digital motion detection via 2 PIR sensors. Sensitivity of motion detection can be parameterised separately in steps for the PIR sectors. Integrated brightness sensor for determining ambient brightness. Adjustment of sensitivity via a dial on the device or via IR remote control PIR KNX (accessory). Evaluation of the measured brightness by means of up to three independent brightness limits. Indication of motion detection (permanent or only during walking test). Up to 5 function blocks that are freely configurable for the "sentinel", "sentinel with switch-off brightness" or "detector" application. Two output communication objects are available for each function block which are transmitted to the KNX via the switching and control commands. Configurable functions: switching, staircase function, dimming value transmitter, scene auxiliary unit, temperature value transmitter, brightness value transmitter, operating mode changeover, switching with forced setting. Function block changeover to bus-controlled switching between two function block groups. Switching the operating mode (OFF AUTO ON) of the first function block during operation either at the device or via a communication object through operation at other motion detector devices for KNX via touch sensor for KNX or visualisation. Blocking individual function blocks as required via the KNX. Manual actuation of the controlled KNX actuators, and therefore deactivation of automatic PIR operation, is possible. In brightness-independent operation, a function block can determine the time span after a previous movement and transmit it to the KNX via a communication object. This function allows for simple monitoring of movements,for example of persons in assisted living residences or in a retirement home. Functionality of motion detection adjustable for the "security light" or "security light with switch-off brightness" application. For the "security light" or "security light with switch-off brightness" applications, the device can be used as a single device, main unit or auxiliary unit. Walking test function to help in planning and adjusting the PIR detection range. Integrated room temperature measurement. Tamper alarm, a 1-bit or 1-byte telegram is triggered when bus coupler is disconnected. IR remote control PIR KNX (accessory) for setting functions of the first function block (dusk stage, sensitivity of motion detection, motion evaluation and overrun time). Switching walking test function on and off. Notes : The motion detector is not suitable for alarm messages in VdS-compliant alarm systems. Also suitable for mounting height of 1.1 m (reduced detection range).