Line-Voltage Fan Coil Room Controller: BACnet MS/TP, RH sensor & control, PIR motion sensor, White Case/Fascia

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

379,32 €

This price is valid until 24.12.24

EAN: 3606480772207

MPN: SER8350A5B11

Package: 1

Technical Information

Item condition	New
Manufacture name	Line-Voltage Fan Coil Room Controller: BACnet MS/TP, RH sensor & control, PIR motion sensor, White Case/Fascia
Brand	Schneider Electric
Categories	Sensors
Country of origin	MX
Mounting method	Surface mounted (plaster)
Assembly arrangement	Control element
Colour	White
Surface protection	Untreated
With display	Yes
Material quality	Thermoplastic
Bus system KNX	No
Bus system radio frequent	No
Bus system Powernet	No
With bus connection	Yes
Number of digital inputs	0
Material	Plastic
Other bus systems	Other
Bus system LON	No
With anti-theft/dismantling protection	Yes
Manual set point setting	Yes
Parallel-service possible	Yes
Presence button	Yes
RAL-number (similar)	9010
Degree of protection (IP)	IP20
With LED indication	No
Transparent	No
Surface finishing	Matt
With local operation	Yes
Bus system KNX radio	No
Radio frequent bidirectional	No
Class of the temperature control	VIII
Standby power consumption (solstandby)	0 W
Min. depth of built-in installation box	0 mm

Packing details

Packing level 1

3606480772207

Downloads

ECOP (Environmental Code of Practice) Declaration EPD (Environmental Product Declaration) Technical manual Instructions for use

Description

SER8300 Series room controllers are used for Line Voltage Fan Coil Unit control with SC3000 Relay Packs. The room controllers rated supply voltage is 7V DC at 2.4watts or 24V AC 50/60Hz Class 2, 4VA. The room controller is colored white and is equiped with a communication port that uses BACnet MS/TP protocol and a PIR sensor. Its Room and Outdoor Air Temperature Display Range is between -40 and 50 oC. The measurement accuracy is +/- 0.5%. The temperature setting range is 12 to 37.5oC for cooling and 4.5 to 32 oC for heating. The room controller is equiped with 2 digital inputs, 5 analog inputs (5 to 10V), 4 analog outputs, and 5 digital outputs. The analog output voltage is 0 to 10V DC at 5mA into 2 kOhm resistance. The digital output rating is 28V AC 50 or 60 Hz, 0.3A, 1.5A inrush current. The product follows the following standards: IEC 61326-1: 2005, FCC part 15 subpart C, RSS 210 issue 8, FCC part 15 subpart B, ICES-003, EN 60950-1: 2006/A2, EN 60950-1: 2013, ETSI EN 301 489-1: v1.9.2. The product follows the directives: 2014/30/EU - electromagnetic compatibility, 2014/35/EU - low voltage directive, 2014/53/EU - radio equipment directive. The ambient air temperature for operation is between 0 and 50oC. The relative humidity for operating or storage is between 0 and 75% non condensing. The humidity reading range is 10 to 90% RH non-condensing.