PM5563 Meter, 2 ethernet, up to 63th H, 1,1M 4DI/2DO 52 alarms, DIN mounted

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

705,25 €

This price is valid until 31.12.24

EAN: 3606480614088

MPN: METSEPM5563

Package: 1

Technical Information

Item condition	New
Manufacture name	PM5563 Meter, 2 ethernet, up to 63th H, 1,1M 4DI/2DO 52 alarms, DIN mounted
Brand	Schneider Electric
Categories	Automatics and control
Country of origin	IN
Harmonized System Code	9028 3090 00
Mounting method	Built-in
Width	0 mm
Model	Measurement transformer
Height	0 mm
Voltage type	AC/DC
Measured value memory	Yes
Indication	Other
Frequency measurement	Yes
Max. current (Imax)	10 A
Reactive power	Yes
Accuracy class	0.2
Harmonics measurement	Yes
Measuring range	20-690 V
Power factor	Yes
Effective power	Yes
Apparent power	Yes
Step angle (cos phi)	No
Supporting protocol for LON	No
Supporting protocol for Modbus	Yes
Max. value storage	Yes
Min. value storage	Yes
With communication interface RS-485	Yes
Calibrated	No
Pulse output	Optic
Pole type	Three conductor/four conductor
Measurement type load profile	Yes
Nominal current (In)	5 A
With communication interface KNX	No
With communication interface according to EN 62056-21	No
Wth communication interface M-Bus	No

Packing details

Packing level 1

3606480614088

Downloads

ECOP (Environmental Code of Practice) Declaration EPD (Environmental Product Declaration) Technical manual Instructions for use Others Declaration DOC CE (Declaration of conformity CE) Mounting instruction

Description

This device is a DIN-mount energy meter without display. The meter provides Class 0.2S accuracy per IEC 62053-22 standard and 128 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 63rd Harmonic. Include 1.1 MegaBytes of memory for up to 14 selectable parameters with configurable interval and duration. This meter also feature the direct monitoring of neutral current. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 100 to 480 VAC and 125 to 250 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 20 to 690 VAC at 45 to 65 Hz. Measurement range between Phase and Neutral is 20 to 400VAC at 45 to 65 Hz. Communication protocol are Modbus RTU and ASCII 2 wires with RS485 port support plus Modbus TCP/IP, Ethernet/IP and BACnet/IP based on 10/100 Mbit/s, daisy chain Ethernet with RJ45 port support. The embedded communication capabilities allow the support of the DNP 3.0 protocol, the access to an onboard web server and a Serial to Ethernet gateway. The meter also has four digital inputs with WAGES support and two digital outputs. There are 52 configurable alarms and it supports eight tariff schedules. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 3.03 inches (77 millimetres), height 3.78 inches (96 millimetres) and product weight 15.9 onces (450 g).