Number of normally closed contacts as main contact
0.000
Number of auxiliary contacts as normally open contact
0.000
Number of auxiliary contacts as normally closed contact
0.000
Rated operation current Ie at AC-3, 400 V
0 A
Rated operation current Ie at AC-1, 400 V
0 A
With manual on/off switch
No
Switching capacity at AC-3, 240 V
0 kA
Initial setting
700.000-10000.000 hPa
End setting
130.000-9150.000 hPa
Number of auxiliary contacts as change-over contact
1.000
Type of electric connection
Screw connection
Explosion-proof
No
Degree of protection (IP)
IP66
Initial value measuring range pressure
0 Pa
Switch off pressure
0.130-9.150 bar
Rated voltage Ue at AC 50 Hz
120.000-240.000 V
Rated voltage Ue at AC 60 Hz
120.000-240.000 V
Rated voltage Ue at DC
250.000 V
Bursting pressure
45.000 bar
Engaging pressure
0.700-10.000 bar
Electronic version
No
End value measuring range pressure
0 Pa
Suitable as 2-point controller
Yes
Suitable as limiter
Yes
Suitable as guard
Yes
Max. test pressure
22.500 bar
Medium temperature
0.000-160.000 °C
With hand operation
No
Pressure-switching differential
0.570 bar
Degree of protection (NEMA)
Other
Max. operating pressure
0 hPa
Thread size
Other
Packing details
Packing level 1
3389110713749
Description
This 10bar pressure switch is part of the XML range, an offer of electromechanical pressure and vacuum switches. These switches have an adjustable differential and are designed for regulation between two thresholds. The function of pressure switches is the control or regulation of pressure levels in hydraulic systems. They transform the pressure change into a digital electrical signal when the preset switching points are reached. This pressure switch has a setting scale and an adjustable range of switching point, or rising pressure, from 0.7bar to 10bar (10.15psi to 145psi). Thanks to the electromechanical technology, this product is reliable and simple to use. It incorporates one C/O single-pole contact, snap action. It has a diaphragm pressure actuator. This pressure switch features a zinc alloy case, a G 1/4 female fluid connector and one entry tapped for Pg 13 cable gland. Electrical connection with screw-clamps terminals. It is suitable for controlling corrosive fluids up to +160°C and sea water up to +30°C. It complies with UL, CSA, EAC, CCC,BV, LROS certifications, and with CE, IEC/EN 60947-5-1, UL 508, CSA C22-2 no. 14 standards. Dedicated accessories, to be ordered separatly, are available to facilitate the setting or ptotect the switch. Knurled adjustment knob, fixing plate, lead sealable protective cover, sealing gaskets, etc. This switch operates in all positions. The XML range brings high level of reliability and quality, long life duration, and a worldwide availability.