PRESSURE TRANSM, 6BAR 0,5-4,5V G1/4 M12

In stock: No Vendor stock: No Minimal order quantity: 1

Price (excl. VAT):

86,76 €

This price is valid until 24.12.24

EAN: 3389119625661

MPN: XMLP006GD11F

Package: 1

Technical Information

Item condition	New
Manufacture name	PRESSURE TRANSM, 6BAR 0,5-4,5V G1/4 M12
Brand	Schneider Electric
Categories	Relays
Country of origin	CH
Harmonized System Code	9026 2020 00
Width	0 mm
Height	0 mm
Depth	32.3 mm
With display	No
Diameter	26 mm
Rated operation power at AC-3, 400 V	0 kW
Number of normally open contacts as main contact	0
Number of normally closed contacts as main contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as normally closed contact	0
Rated operation current Ie at AC-3, 400 V	0 A
Rated operation current Ie at AC-1, 400 V	0 A
With manual on/off switch	No
Switching capacity at AC-3, 240 V	0 kA
Initial setting	0-6000 hPa
End setting	0-6000 hPa
Number of auxiliary contacts as change-over contact	0
Type of electric connection	Other
Explosion-proof	No
Degree of protection (IP)	IP65/IP67
Initial value measuring range pressure	0 Pa
Switch off pressure	0-6 bar
Rated voltage Ue at DC	5 V
Bursting pressure	24 bar
Engaging pressure	0-6 bar
Electronic version	Yes
End value measuring range pressure	600000 Pa
Suitable as 2-point controller	No
Suitable as limiter	No
Suitable as guard	Yes
Max. test pressure	18 bar
Medium temperature	-15-125 °C
With hand operation	No
Pressure-switching differential	0 bar
Degree of protection (NEMA)	Other
Max. operating pressure	0 hPa
Thread size	Other

Packing details

Packing level 1

3389119625661

Description

This product is part of the XM range, an offer of pressure sensors and switches. The pressure transmitter provides analogue output, which delivers a signal proportional to the measured pressure. It supports 0.5V to 4.5V, 3-wire analogue output. It supports a pressure setting range of 0bar to 6bar and maximum permissible accidental pressure of 18bar. It is furnished with 4-pin M12 male connector for electrical connection and G 1/4inch (female) for fluid connection. It is a pressure transmitter with a rated supply voltage of 5V DC (voltage limits 4.5V to 5.5V) and a current consumption of ≤5mA. It offers mechanical durability of about 10 million cycles. It is an IP65, IP67 and IP69K rated product. The electronic pressure transmitter is made of AISI 316L stainless steel with ceramic pressure measuring cell and fluorocarbon rubber gasket. Its dimensions are 26mm (diameter) x 32.3mm (length) and weighs 0.075kg. This pressure transmitter is suitable for controlling fluids such as fresh water (0°C to 125°C), air (-15°C to 125°C), hydraulic oil (-15°C to 125°C) and gas (-15°C to 125°C). It is used for pressure control or monitoring on water pumps. This product is certified by CULus and CE. It complies with NSF ANSI 61 and EN/IEC 61326-2-3 standards. One of the most comprehensive catalogues of industrial and power pressure sensors on the market, including a user-friendly electronic transmitter sensor which can be configured in complete simplicity, with unrivalled flexibility. With typical precision better than 0.5% of the rating, these transmitters are particularly suitable for industrial applications. Compatibility with a large number of fluids such as air, fresh water, hydraulic oils and refrigeration fluids.